86300B
1.INSTALL AMPLIFIER ANTENNA ASSEMBLY (w/o Diversity)
Install the amplifier antenna with the bolt.
Attach the clamp and connect the 2 connectors.
86300B
2.INSTALL AMPLIFIER ANTENNA ASSEMBLY (w/ Diversity)
Attach the 9 clamps to install antenna.
Connect the 3 connectors and install the 2 bolts.
88566R
3.INSTALL REAR NO. 1 ROOF AIR DUCT (w/ Diversity)
Install the duct with the 3 clips.
88566T
4.INSTALL REAR NO. 3 ROOF AIR DUCT (w/ Diversity)
Install the duct with the clip.
88566U
5.INSTALL REAR NO. 4 ROOF AIR DUCT (w/ Diversity)
Install the duct with the 2 clips.
88566V
6.INSTALL REAR NO. 5 ROOF AIR DUCT (w/ Diversity)
w/o Sliding Roof:
Install the duct with the 2 clips.
w/ Sliding Roof:
Install the duct with the 2 clips.
88566S
7.INSTALL REAR NO. 2 ROOF AIR DUCT (w/ Diversity)
w/o Sliding Roof:
Install the duct with the 2 clips.
w/ Sliding Roof:
Install the duct with the 2 clips.
63310
8.INSTALL ROOF HEADLINING ASSEMBLY (w/ Diversity)
w/o Sliding Roof:
Install the roof headlining (See page Vehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING (w/o Sliding Roof)>INSTALLATION).
w/ Sliding Roof:
Install the roof headlining (See page Vehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING (w/ Sliding Roof)>INSTALLATION).
9.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).