This is the visual mute signal circuit from the multi-media module receiver assembly to the television display assembly.
Measure the voltage according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| F78-4 (VMTR) - Body ground | RSE is playing → Source is changed | 4 V or higher → Below 0.7 V → 4 V or higher |
| *a | Component with harness connected
(Multi-media Module Receiver Assembly) |
OK
(See pageAudio / Visual / Telematics>AUDIO / VIDEO>REAR SEAT ENTERTAINMENT SYSTEM>PROBLEM SYMPTOMS TABLE)
NG
Disconnect the F78 multi-media module receiver assembly connector.
Disconnect the L53 television display assembly connector.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| F78-4 (VMTR) - L53-17 (VMTR) | Always | Below 1 Ω |
| F78-4 (VMTR) - Body ground | Always | 10 kΩ or higher |
OK
NG
Disconnect the L53 television display assembly connector.
Measure the voltage according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| L53-17 (VMTR) - Body ground | Display is operating | 4 V or higher |
| *a | Front view of wire harness connector
(to Television Display Assembly) |
OK
NG