Display the "Display" screen.
Turn the light control switch to the tail or head position.
Check if "Day Mode" on the display adjustment screen is on.
| *a | Example |
| Result | Proceed to |
|---|---|
| "Day Mode" setting is on. | A |
| "Day Mode" setting is off. | B |
A
B
Enter the "Vehicle Signal Check Mode" screen. Refer to Check Vehicle Signal in Operation Check (See page Audio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM(w/ Navigation System)>OPERATION CHECK).
Check that the display changes between ON and OFF according to the light control switch operation.
| Light Control Switch | Display |
|---|---|
| Tail or head | ON |
| Off | OFF |
The display is updated once per second. It is normal for the display to lag behind the actual switch operation.
OK
NG