86150
1.INSTALL NO. 1 WOOFER BOX SPEAKER ASSEMBLY
Install the box speaker with the 5 bolts.
Connect the connector.
62510P
2.INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH
64937A
3.INSTALL NO. 1 TONNEAU COVER HOLDER CAP (w/ Tonneau Cover)
71845B
4.INSTALL REAR SEAT COVER CAP (w/ Rear No. 2 Seat, except Face to Face Seat Type)
67917C
5.INSTALL REAR DOOR SCUFF PLATE RH
51775
6.INSTALL REAR STEP COVER
58574A
7.INSTALL REAR FLOOR MAT REAR SUPPORT PLATE
8.INSTALL REAR NO. 2 SEAT ASSEMBLY RH (for Face to Face Seat Type)
Use the same procedures described for the LH side (See page Vehicle Interior>SEAT>REAR NO. 2 SEAT ASSEMBLY(for Face to Face Seat Type)>INSTALLATION).
9.INSTALL REAR NO. 2 SEAT ASSEMBLY RH (except Face to Face Seat Type)
Use the same procedures described for the LH side (See page Vehicle Interior>SEAT>REAR NO. 2 SEAT ASSEMBLY(except Face to Face Seat Type)>INSTALLATION).
64910J
10.INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)
11.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).