Home › Vehicle Interior › SEAT › REAR NO. 2 SEAT ASSEMBLY(except Face to Face Seat Type) › 2014.08–2015.08
RM2660E _58 Vehicle Interior _052845 SEAT _0255630 REAR NO. 2 SEAT ASSEMBLY(except Face to Face Seat Type) A

SEAT  REAR NO. 2 SEAT ASSEMBLY(except Face to Face Seat Type)  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 72601 1.INSTALL REAR SEAT LOCK STRIKER SUB-ASSEMBLY

a.

Install the 4 seat lock strikers with 8 bolts.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)


b.

Return the floor carpet to its original position.


Hide 79953 2.INSTALL NO. 3 SEAT CUSHION COVER

a.

Attach the 16 claws and 4 clips to install the 4 seat cushion covers.


Hide 78901 3.INSTALL FOLD SEAT LEG LOCK SUB-ASSEMBLY

a.

Install the fold seat leg lock with the 2 nuts.

Torque:
12 N*m (122 kgf*cm, 9 ft.*lbf)


b.

Attach the 2 cable clamps.


Hide 88566R 4.INSTALL REAR ROOF NO. 1 AIR DUCT (w/ Rear Air Conditioning System)

Hide 72058C 5.INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH

a.

Attach the 4 claws to install the seat lock control lever.


Hide 62520P 6.INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH

a.

w/ Sliding Roof:

Install the front quarter trim panel assembly LH (See page Vehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING (w/ Sliding Roof)>INSTALLATION).


b.

w/o Sliding Roof:

Install the front quarter trim panel assembly LH (See page Vehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING (w/o Sliding Roof)>INSTALLATION).


Hide 11.INSTALL REAR NO. 2 SEAT ASSEMBLY

B181811E03
1.083,1.917 1.271,2.104 0.188,0.188 10 true 1 0.635,1.75 0.781,1.958 0.146,0.208 10 true 2 1.604,1.042 1.729,1.198 0.125,0.156 10 false 3 2.688,1.281 2.813,1.438 0.125,0.156 10 false 4

a.

Temporarily install the seat assembly with the 4 bolts.

NOTICE:

Be careful not to damage the vehicle body.



b.

Tighten the bolts in the order shown in the illustration.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)


Hide 71486A 12.INSTALL REAR NO. 2 SEAT HINGE COVER LH

a.

Attach the clip and 2 claws to install the cover.


Hide 71639 13.INSTALL REAR SEAT CUSHION HINGE COVER LH

a.

Attach the 3 claws to install the cover.


b.

Return the seat to the upright position.


Hide 71950F 14.INSTALL REAR NO. 2 SEAT HEADREST ASSEMBLY LH (w/ Rear Center Seat Headrest)