Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM › from 2015.08
RM2660E _56 Audio / Visual / Telematics _052829 NAVIGATION / MULTI INFO DISPLAY _0255494 NAVIGATION SYSTEM J

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM  Touch Panel Switch does not Function  


PROCEDURE

1.CHECK MULTI-DISPLAY
a.

Check if there is any foreign matter caught between the display and exterior frame of the multi-display assembly.

OK:

No foreign matter is caught between the display and exterior frame of the multi-display assembly.


HINT:

If there is foreign matter between the display and exterior frame of the multi-display assembly, the touch panel will remain pressed, preventing touch switch operation.




OK

2.CHECK TOUCH PANEL

NG

REMOVE FOREIGN MATTER

2.CHECK TOUCH PANEL
a.

Check for foreign matter on the display.

OK:

The display is clean.




OK

3.CHECK TOUCH SWITCH (OPERATION CHECK)

NG

CLEAN DISPLAY AND RECHECK TOUCH PANEL

3.CHECK TOUCH SWITCH (OPERATION CHECK)
E176521

a.

Enter the "Touch Switch Check" screen. Refer to Check Touch Switch in Operation Check (See page Audio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>OPERATION CHECK).


b.

Touch the display in the area where the switch malfunction occurs.

OK:

A "+" mark appears at the touched position.




OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

NG