Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
55318C
1.REMOVE INSTRUMENT SIDE PANEL LH
55474C
2.REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH
55449C
3.REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION
55403C
4.REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH
55475A
5.REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH
55606
6.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)
55432D
7.REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL
89343C
8.REMOVE NO. 1 CLEARANCE WARNING BUZZER
Using a clip remover, detach the clamp and remove the No. 1 clearance warning buzzer.
Disconnect the connector.