Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
84490A
1.INSTALL BACK SONAR OR CLEARANCE SONAR SWITCH ASSEMBLY
Attach the 2 claws to install the back sonar or clearance sonar switch assembly.
55446A
2.INSTALL NO. 1 SWITCH HOLE BASE
55432D
3.INSTALL NO. 1 LOWER INSTRUMENT PANEL FINISH PANEL
55606
4.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)
55475A
5.INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH
55403C
6.INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH
55449C
7.INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION
55474C
8.INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH
55318C
9.INSTALL INSTRUMENT SIDE PANEL LH