89747F
1.INSTALL BLIND SPOT MONITOR BUZZER
Connect the connector.
Attach the clamp to install the blind spot monitor buzzer.
62471D
2.INSTALL REAR UPPER PILLAR GARNISH RH
Use the same procedures described for the LH side (See page Vehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING (w/ Sliding Roof)>INSTALLATION).
62510P
3.INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH
Use the same procedures described for the LH side (See page Vehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING (w/ Sliding Roof)>INSTALLATION).
71845B
4.INSTALL REAR SEAT COVER CAP (w/ Rear No. 2 Seat)
Use the same procedures described for the LH side (See page Vehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING (w/ Sliding Roof)>INSTALLATION).
58574A
5.INSTALL REAR FLOOR MAT REAR SUPPORT PLATE
67917C
6.INSTALL REAR DOOR SCUFF PLATE RH
Use the same procedures described for the LH side (See page Vehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING (w/ Sliding Roof)>INSTALLATION).
51775
7.INSTALL REAR STEP COVER
8.INSTALL REAR NO. 2 SEAT ASSEMBLY RH (w/ Rear No. 2 Seat)
64910J
9.INSTALL TONNEAU COVER ASSEMBLY