Home › Vehicle Interior › DOOR LOCK › WIRELESS DOOR LOCK CONTROL SYSTEM(w/o Entry and Start System) › from 2015.08
RM2660E _58 Vehicle Interior _052838 DOOR LOCK _0255552 WIRELESS DOOR LOCK CONTROL SYSTEM(w/o Entry and Start System) U

DOOR LOCK  WIRELESS DOOR LOCK CONTROL SYSTEM(w/o Entry and Start System)  TERMINALS OF ECU  


CHECK MAIN BODY ECU


U166485E02
1.146,2.521 1.552,2.281 false 1.625,2.542 2.063,2.813 false 3.219,0.99 3.635,0.75 false 1.448,1.135 1.729,1.333 0.281,0.198 10 false 2K 1.448,1.74 1.729,1.938 0.281,0.198 10 false 2H 0.927,2.458 1.208,2.656 0.281,0.198 10 false 2G 2.104,2.74 2.385,2.938 0.281,0.198 10 false 2F 3.115,0.906 3.396,1.104 0.281,0.198 10 false A 5.479,1.01 5.76,1.208 0.281,0.198 10 false 2J 5.49,1.677 5.771,1.875 0.281,0.198 10 false 2I 1.5,3.156 1.781,3.354 0.281,0.198 10 false 2K 4.531,3.146 4.813,3.344 0.281,0.198 10 false 2J 6.438,3.146 6.719,3.344 0.281,0.198 10 false 2F 1.271,5.052 1.552,5.25 0.281,0.198 10 false 2H 3.021,5.073 3.302,5.271 0.281,0.198 10 false 2G 5.313,5.042 5.594,5.24 0.281,0.198 10 false 2I 3.646,6.656 3.927,6.854 0.281,0.198 10 false A 0.167,0.042 0.448,0.24 0.281,0.198 12 false *1

Text in Illustration
*1 Cowl Side Junction Block LH - -

U157885E03
4.781,1.76 4.542,2.073 false 6.052,1.75 5.813,2.063 false 5.458,1.76 5.219,2.073 false 1.844,2.781 2.427,3.083 0.583,0.302 10 false A 1.99,3.865 2.573,4.167 0.583,0.302 10 false E117 3.604,3.875 4.188,4.177 0.583,0.302 10 false E118 5,3.875 5.583,4.177 0.583,0.302 10 false E137 5.51,1.625 6.094,1.927 0.583,0.302 10 false E118 6.115,1.604 6.698,1.906 0.583,0.302 10 false E137 4.823,1.615 5.406,1.917 0.583,0.302 10 false E117 0.104,0 0.688,0.302 0.583,0.302 12 false *1

Text in Illustration
*1 Main Body ECU - -


b.

Connect the cowl side junction block LH connectors.


c.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
A-11 (GND1) - Body ground None - Body ground Ground Always Below 1 Ω
A-30 (ACC) - Body ground None - Body ground ACC power supply ignition switch ACC 11 to 14 V
ignition switch off Below 1 V
A-31 (BECU) - Body ground None - Body ground Battery power supply Always 11 to 14 V
A-32 (IG) - Body ground None - Body ground IG power supply ignition switch ON 11 to 14 V
ignition switch off Below 1 V

If the result is not as specified, there may be a malfunction on the wire harness side.



e.

Measure the voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
2H-29 (BZR) - Body ground G - Body ground Wireless door lock buzzer signal Wireless door lock buzzer off Below 1 V
Wireless door lock buzzer on Pulse generation
2J-16 (LSFR) - Body ground B - Body ground Front door RH unlock detection switch input signal Front door RH unlocked Below 1 V
ignition switch off, all doors closed and front door RH locked Pulse generation
2J-19 (LSFL) - Body ground G - Body ground Front door LH unlock detection switch input signal Front door LH unlocked Below 1 V
ignition switch off, all doors closed and front door LH locked Pulse generation
2J-28 (KSW) - Body ground G - Body ground Key unlock warning switch input No key in ignition key cylinder Pulse generation
Key in ignition key cylinder Below 1 V
2J-29 (RCTY) - Body ground BE - Body ground Rear door courtesy light switch assembly RH input signal Rear door RH open Below 1 V
Rear door RH closed Pulse generation
2K-31 (BCTY) - Body ground W - Body ground Back door courtesy light switch input Back door closed Below 1 V
Back door open Pulse generation
2K-33 (LSWL) - Body ground L - Body ground Rear door LH unlock detection switch input signal Rear door LH unlocked Below 1 V
ignition switch off, all doors closed and rear door LH locked Pulse generation
2K-34 (LCTY) - Body ground BE - Body ground Rear door courtesy light switch assembly LH input signal Rear door LH open Below 1 V
Rear door LH closed Pulse generation
E117-2 (LSWR) - Body ground W - Body ground Rear door RH unlock detection switch input signal Rear door RH unlocked Below 1 V
ignition switch off, all doors closed and rear door RH locked 11 to 14 V
E118-4 (RDA) - Body ground G - Body ground Door control receiver input No key in ignition key cylinder, all doors closed and transmitter switch off → on Pulse generation
E118-5 (PRG) - Body ground L - Body ground Door control receiver output Key in ignition key cylinder → No key in ignition key cylinder Pulse generation
E118-6 (FLCY) - Body ground V - Body ground Front door courtesy light switch assembly LH input signal Front door LH open Below 1 V
Front door LH closed Pulse generation
E118-17 (LSWB) - Body ground B - Body ground Back door unlock detection switch input signal Back door unlocked Below 1 V
ignition switch off, all doors closed and back door locked 11 to 14 V
E118-27 (FRCY) - Body ground V - Body ground Front door courtesy light switch assembly RH input signal Front door RH open Below 1 V
Front door RH closed Pulse generation

If the result is not as specified, the ECU may have a malfunction.



CHECK DOOR CONTROL RECEIVER


U166245E02
1.573,0.51 1.865,0.677 0.292,0.167 10 false L47

a.

Disconnect the L47 receiver connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
L47-1 (GND) - Body ground BR - Body ground Ground Always Below 1 Ω
L47-5 (+B) - Body ground R - Body ground Battery power supply Always 4.6 to 5.4 V

If the result is not as specified, there may be a malfunction on the wire harness side.