Home › Vehicle Interior › DOOR LOCK › UNLOCK WARNING SWITCH › from 2015.08
RM2660E _58 Vehicle Interior _052838 DOOR LOCK _0255555 UNLOCK WARNING SWITCH A

DOOR LOCK  UNLOCK WARNING SWITCH  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (See page General>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION).


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).


Hide 84052 7.REMOVE UNLOCK WARNING SWITCH ASSEMBLY

a.
B292784

Disconnect the unlock warning switch connector.


b.

Detach the 2 claws and slide the unlock warning switch as shown in the illustration.


c.
B292785E02
1.521,1.115 1.521,1.594 1.521,1.594 1.698,1.594 true 1.719,1.531 1.938,1.719 0.219,0.188 10 true *1

Push in the pin, slide the unlock warning switch as shown in the illustration and remove it.

Text in Illustration
*1 Pin