Wear protective gloves. Sharp areas on the parts may injure your hands.
Use the same procedures for LHD and RHD vehicles.
The procedures listed below are for LHD vehicles.
73920A
1.INSTALL FRONT SEAT AIRBAG ASSEMBLY LH
Make sure that the seat frame assembly is not deformed. If it is, replace it with a new one.
Install the front seat airbag assembly with 2 nuts.
Attach the 2 clamps to connect the wire harness.
Attach the 5 clamps to connect the wire harness.
2.INSTALL SEATBACK COVER WITH PAD
71931
3.INSTALL FRONT SEAT HEADREST SUPPORT
71706
4.INSTALL FRONT SEATBACK BOARD SUB-ASSEMBLY LH (w/ Seatback Board)
71862
5.INSTALL FRONT INNER SEAT CUSHION SHIELD LH
73240
6.INSTALL FRONT SEAT INNER BELT ASSEMBLY LH
71812D
7.INSTALL FRONT SEAT CUSHION SHIELD LH
72526A
8.INSTALL RECLINING ADJUSTER RELEASE HANDLE LH
72457
9.INSTALL VERTICAL SEAT ADJUSTER KNOB (for 8 Way Seat Type)
72495
10.INSTALL VERTICAL ADJUSTING HANDLE LH (for 8 Way Seat Type)
72462A
11.INSTALL VERTICAL ADJUSTER COVER LH (for 8 Way Seat Type)
12.INSTALL FRONT SEAT ASSEMBLY LH
Install the front seat assembly LH (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Manual Seat)>INSTALLATION).