Wear protective gloves. Sharp areas on the parts may injure your hands.
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
72760D
1.INSTALL LUMBAR SUPPORT ADJUSTER ASSEMBLY LH (w/ Lumbar support)
Install the lumbar support adjuster with the 2 screws.
Connect the lumbar support adjuster connector.
Attach the 4 hooks to install the seatback spring.
Connect the active headrest cable with the cable clamp.
Install the 4 springs.
2.INSTALL SEATBACK COVER WITH PAD
71931
3.INSTALL FRONT SEAT HEADREST SUPPORT (w/ Active Headrest)
71706
4.INSTALL FRONT SEATBACK BOARD SUB-ASSEMBLY LH (w/ Seatback Board)
71862
5.INSTALL FRONT INNER SEAT CUSHION SHIELD LH
73240
6.INSTALL FRONT SEAT INNER BELT ASSEMBLY LH
71812D
7.INSTALL FRONT SEAT CUSHION SHIELD LH
72526A
8.INSTALL RECLINING ADJUSTER RELEASE HANDLE LH
72457
9.INSTALL VERTICAL SEAT ADJUSTER KNOB (for 8 Way Seat Type)
72495
10.INSTALL VERTICAL ADJUSTING HANDLE LH (for 8 Way Seat Type)
72462A
11.INSTALL VERTICAL ADJUSTER COVER LH (for 8 Way Seat Type)
71200S
12.INSTALL FRONT SEAT ASSEMBLY LH
Install the front seat assembly (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Manual Seat)>INSTALLATION).