Wear protective gloves. Sharp areas on the parts may injure your hands.
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
71200S
1.REMOVE FRONT SEAT ASSEMBLY LH
Remove the front seat assembly (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Manual Seat)>REMOVAL).
72462A
2.REMOVE VERTICAL ADJUSTER COVER LH (for 8 Way Seat Type)
72495
3.REMOVE VERTICAL ADJUSTING HANDLE LH (for 8 Way Seat Type)
72457
4.REMOVE VERTICAL SEAT ADJUSTER KNOB (for 8 Way Seat Type)
72526A
5.REMOVE RECLINING ADJUSTER RELEASE HANDLE LH
71812D
6.REMOVE FRONT SEAT CUSHION SHIELD LH
73240
7.REMOVE FRONT SEAT INNER BELT ASSEMBLY LH
71862
8.REMOVE FRONT INNER SEAT CUSHION SHIELD LH
71706
9.REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY LH (w/ Seatback Board)
71931
10.REMOVE FRONT SEAT HEADREST SUPPORT (w/ Active Headrest)
11.REMOVE SEATBACK COVER WITH PAD
72760D
12.REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY LH (w/ Lumbar Support)
Remove the 4 springs.
Remove the cable clamp and disconnect the active headrest cable from the seatback spring.
Detach the 4 hooks and remove the seatback spring.
Disconnect the lumbar support adjuster connector.
Remove the 2 screws and lumbar support adjuster.