Use the same procedures for the LHD and RHD.
The procedures listed below are for the LHD.
73390A
1.INSTALL REAR SEAT INNER BELT ASSEMBLY
Install the seat belt with the bolt.
The anchor part of the seat belt must not overlap the protruding part.
71833A
2.INSTALL REAR NO. 1 SEAT RECLINING COVER RH
3.INSTALL REAR NO. 1 SEAT ASSEMBLY LH
Install the rear No. 1 seat assembly (See page Vehicle Interior>SEAT>REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Seat Type 60 Side)>INSTALLATION).