Home › Vehicle Interior › SEAT › REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Seat Type 60 Side) › 2014.08–2015.08
RM2660E _58 Vehicle Interior _052845 SEAT _0255632 REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Seat Type 60 Side) A

SEAT  REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Seat Type 60 Side)  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 72607 1.INSTALL REAR SEAT CUSHION LOCK STRIKER SUB-ASSEMBLY

a.

Install the 4 lock strikers with the 10 bolts.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)

B184033E01
3.575,0.098 4.196,0.281 0.621,0.184 10 LH Side: 0.264,0.098 0.906,0.281 0.642,0.184 10 RH Side:


Hide 87212K 2.INSTALL REAR NO. 6 AIR DUCT (w/ Rear Air Conditioning System)

Hide 87174 4.INSTALL REAR AIR DUCT GUIDE (w/ Rear Air Conditioning System)

Hide 87217B 5.INSTALL AIR DUCT PLUG (w/ Rear Air Conditioning System)

Hide 62520P 6.INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH

a.

w/ Sliding Roof:

Install the front quarter trim panel assembly LH (See page Vehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING (w/ Sliding Roof)>INSTALLATION).


b.

w/o Sliding Roof:

Install the front quarter trim panel assembly LH (See page Vehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING (w/o Sliding Roof)>INSTALLATION).


Hide 62510P 7.INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH

a.

w/ Sliding Roof:

Install the front quarter trim panel assembly RH (See page Vehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING (w/ Sliding Roof)>INSTALLATION).


b.

w/o Sliding Roof:

Install the front quarter trim panel assembly RH (See page Vehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING (w/o Sliding Roof)>INSTALLATION).


Hide 71845B 8.INSTALL REAR SEAT COVER CAP (w/ Rear No. 2 Seat, except Face to Face Seat Type)

Hide 10.INSTALL REAR NO. 2 SEAT ASSEMBLY

a.

for Face to Face Seat Type:

Install the rear No. 2 seat assembly (See page Vehicle Interior>SEAT>REAR NO. 2 SEAT ASSEMBLY(for Face to Face Seat Type)>INSTALLATION).


b.

except Face to Face Seat Type:

Install the rear No. 2 seat assembly (See page Vehicle Interior>SEAT>REAR NO. 2 SEAT ASSEMBLY(except Face to Face Seat Type)>INSTALLATION).


Hide 71696 14.INSTALL REAR NO. 2 SEAT PROTECTOR

B184031E01
1,1.094 1.042,1.094 false 1.042,1.094 1.146,1.458 false 0.708,1.396 0.771,1.396 false 0.771,1.396 1,1.479 false 0.771,1.396 0.938,1.635 false 1.542,1.385 1.479,1.385 false 1.479,1.385 1.292,1.479 false 1.479,1.385 1.313,1.677 false 2.385,1.385 2.333,1.385 false 2.333,1.385 2.125,1.552 false 2.333,1.385 2.198,1.74 false 1.563,2.083 1.615,2.083 false 1.615,2.083 1.792,1.635 false 1.615,2.083 1.865,1.823 false 2.354,2.094 2.292,2.094 false 2.292,2.094 2.031,1.854 false 0.104,0.083 0.219,0.24 0.115,0.156 10 true A 1.26,0.083 1.385,0.24 0.125,0.156 10 true B 2.417,0.083 2.542,0.24 0.125,0.156 10 true C 0.854,1 0.969,1.156 0.115,0.156 10 true A 2.385,2 2.5,2.156 0.115,0.156 10 false A 1.427,2 1.552,2.156 0.125,0.156 10 false B 0.573,1.313 0.698,1.469 0.125,0.156 10 false B 2.417,1.302 2.542,1.458 0.125,0.156 10 false C 1.563,1.302 1.688,1.458 0.125,0.156 10 false C

a.

Attach the 10 claws to install the 2 seat protectors.


Hide 71695C 15.INSTALL REAR NO. 1 SEAT PROTECTOR

B184032E01
2.688,1.271 2.75,1.271 false 0.792,1.25 0.729,1.25 false 0.927,1.563 0.656,1.563 false 0.927,1.563 0.563,1.729 false 0.448,2.031 0.396,2.031 false 0.396,2.031 0.323,1.594 false 0.396,2.031 0.25,1.771 false 2.875,1.969 2.927,1.969 false 2.573,1.552 2.781,1.552 false 2.573,1.552 2.875,1.729 false 2.75,1.271 2.958,1.406 false 0.729,1.25 0.51,1.427 false 2.927,1.969 3.115,1.573 false 2.927,1.969 3.156,1.75 false 0.104,0.083 0.24,0.25 0.135,0.167 10 true A 2.406,0.083 2.542,0.25 0.135,0.167 10 true C 1.271,0.083 1.406,0.25 0.135,0.167 10 true B 0.813,1.167 0.948,1.333 0.135,0.167 10 false A 2.542,1.188 2.677,1.354 0.135,0.167 10 false A 2.729,1.885 2.865,2.052 0.135,0.167 10 false C 0.469,1.958 0.583,2.104 0.115,0.146 10 false C 2.427,1.469 2.563,1.635 0.135,0.167 10 false B 0.958,1.469 1.094,1.635 0.135,0.167 10 true B

a.

Attach the 10 claws to install the 2 seat protectors.


Hide 71300S 16.INSTALL REAR NO. 1 SEAT ASSEMBLY RH

Hide 71400S 17.INSTALL REAR NO. 1 SEAT ASSEMBLY LH

B181219E01
2.521,0.729 2.635,0.885 0.115,0.156 10 true 1 1.906,1.135 2.021,1.292 0.115,0.156 10 true 2 1.094,2.271 1.208,2.427 0.115,0.156 10 false 3 2.573,2.51 2.688,2.667 0.115,0.156 10 true 4

a.

Temporarily install the seat assembly with the 4 bolts.

NOTICE:

Be careful not to damage the vehicle body.



b.

Tighten the bolts in the order shown in the illustration.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)


c.
B184034

w/ Rear Seat Side Airbag:

Connect the connector.


d.

w/ Seat Heater System:

Connect the connector.


Hide 71691K 18.INSTALL REAR NO. 4 SEAT CUSHION HINGE COVER

B181217

a.

Attach the 2 clips and 2 claws to install the cover.


Hide 71691H 19.INSTALL REAR NO. 2 SEAT CUSHION HINGE COVER

B181218

a.

Attach the 2 clips and 2 claws to install the cover.


Hide 71692K 20.INSTALL REAR NO. 5 SEAT CUSHION HINGE COVER

a.

Return the seat to the upright position.


b.
B261018

Attach the 7 claws to install the cover.


Hide 71692H 21.INSTALL REAR NO. 3 SEAT CUSHION HINGE COVER

B258451

a.

Attach the 6 claws to install the cover.


Hide 22.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).


Hide 23.CHECK SRS WARNING LIGHT

Hide 71400S 24.INSPECT REAR NO. 1 SEAT ASSEMBLY LH

a.

w/ Seat Heater System:

Check the seat heater operation.

i.

Turn the ignition switch to ON.


ii.

Turn the seat heater switch on.


iii.

Wait 5 minutes or more and confirm that the seat surface becomes warm.