Home › Vehicle Interior › HEATING / AIR CONDITIONING › CONDENSER FAN
RM2660E _58 Vehicle Interior _052847 HEATING / AIR CONDITIONING _0255676 CONDENSER FAN A

HEATING / AIR CONDITIONING  CONDENSER FAN  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (See page General>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION).


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).


Hide 88590 4.REMOVE SHROUD BLOWER ASSEMBLY

E154213

a.

Disconnect the connector.


b.

Remove the bolt and shroud blower as shown in the illustration.