86111
1.INSTALL MULTI-DISPLAY ASSEMBLY WITH BRACKET
Connect the connectors.
Insert the radio receiver and attach the 8 claws on its backside.
When inserting the radio receiver, do not press the knobs on it.
Install the radio receiver with the 4 bolts.
55680A
2.INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY
55670
3.INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY
55510F
4.INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY
5.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).