Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System) › from 2015.08
RM2660E _58 Vehicle Interior _052847 HEATING / AIR CONDITIONING _0255699 AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System) C

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)  B1488/88  Rear Air Mix Damper Control Servo Motor Circuit on Front Passenger Side  


DESCRIPTION

*1: for LHD

*2: for RHD


The rear air mix damper servo motor RH*1 or LH*2 sends pulse signals to indicate the damper position to the air conditioning amplifier assembly. The air conditioning amplifier assembly activates the motor (normal or reverse) based on these signals to move the rear air mix damper to the appropriate position. This adjusts the amount of air passing through the heater core after passing the evaporator and controls the temperature of the blown air.

HINT:

Confirm that no mechanical problem is present because this trouble code can be output when either a damper link or damper is mechanically locked.


DTC Code DTC Detection Condition Trouble Area
B1488/88 The rear air mix damper position does not change even if the air conditioning amplifier assembly operates the air mix damper servo motor RH*1 or LH*2.
·

Rear air mix damper servo motor RH*1

·

Rear air mix damper servo motor LH*2

·

No. 2 air conditioning harness assembly

·

Harness or connector

·

Air conditioning amplifier assembly



WIRING DIAGRAM

E334389E17
4.948,1.969 6.552,2.375 1.604,0.406 10 false Air Conditioning Amplifier Assembly 4.958,1.823 5.344,1.979 0.385,0.156 10 false E36 4.823,0.5 5.292,0.667 0.469,0.167 10 false RBUS 4.833,0.813 5.302,0.979 0.469,0.167 10 false RBBU 4.833,1.115 5.302,1.281 0.469,0.167 10 false RBUG 4.563,0.458 5.031,0.625 0.469,0.167 10 false 13 4.573,0.813 5.042,0.979 0.469,0.167 10 false 14 4.583,1.125 5.052,1.292 0.469,0.167 10 false 12 4.052,0.458 4.521,0.625 0.469,0.167 10 false 3 4.052,0.813 4.521,0.979 0.469,0.167 10 false 4 4.052,1.125 4.521,1.292 0.469,0.167 10 false 2 0.708,1.688 2.802,2.052 2.094,0.365 10 false Rear Air Mix Damper Servo Motor RH*1, LH*2 2.938,1.813 3.396,1.958 0.458,0.146 10 false K19 0.729,2.417 2.396,2.656 1.667,0.24 10 false : LIN Communication Line 2.927,1.958 4.333,2.385 1.406,0.427 10 false No. 2 Air Conditioning Harness Assembly 3.563,0.458 4.031,0.625 0.469,0.167 10 false RBUS 3.563,0.813 4.031,0.979 0.469,0.167 10 false RBBU 3.563,1.125 4.031,1.292 0.469,0.167 10 false RBUG 5.844,0.594 6.313,0.76 0.469,0.167 10 false IC 6.417,0.771 6.688,0.979 0.271,0.208 10 false +B 2.656,2.469 3.427,2.729 0.771,0.26 10 false *1: for LHD 3.531,2.458 4.302,2.719 0.771,0.26 10 false *2: for RHD

PROCEDURE

1.READ VALUE USING GTS (A/M SERVO TARG PULSE [REAR P], A/M SERVO ACTUAL PULSE [REAR P]) (REAR AIR MIX DAMPER SERVO MOTOR)

*1: for LHD

*2: for RHD


a.

Use the Data List to check if the mode damper servo motor RH*1 or LH*2 is functioning properly (See page Vehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)>DATA LIST / ACTIVE TEST).

Air Conditioner
Tester Display Measurement Item/Range Normal Condition Diagnostic Note
A/M Servo Targ Pulse (Rear P) Rear air mix damper servo motor RH*1 or LH*2 target pulse / Min.: 128, Max.: 383
for LHD:
·

MAX COLD: 258 (pulse)

·

MAX HOT: 213 (pulse)


for RHD:
·

MAX COLD: 254 (pulse)

·

MAX HOT: 299 (pulse)


·

Displayed between 213 and 258 pulse (for LHD)

·

Displayed between 254 and 299 pulse (for RHD)

·

Rear air mix damper servo motor RH*1 or LH*2 system malfunction


A/M Servo Actual Pulse (Rear P) Rear air mix damper servo motor RH*1 or LH*2 actual pulse / Min.: 128, Max.: 383
for LHD:
·

MAX COLD: 258 (pulse)

·

MAX HOT: 213 (pulse)


for RHD:
·

MAX COLD: 254 (pulse)

·

MAX HOT: 299 (pulse)


·

Displayed between 213 and 258 pulse (for LHD)

·

Displayed between 254 and 299 pulse (for RHD)

·

Rear air mix damper servo motor RH*1 or LH*2 system malfunction



OK:

When the rear temperature adjustment switch for front passenger side is turned from MAX COLD to MAX HOT, the actual pulse changes following the target pulse.


Result
Result Proceed to
Target pulse changes but actual pulse does not change A
Target pulse and actual pulse do not change B
Actual pulse changes following the target pulse (When troubleshooting according to the DTC) C
Actual pulse changes following the target pulse (When troubleshooting according to Problem Symptoms Table) D



A

2.CHECK HARNESS AND CONNECTOR (NO. 2 AIR CONDITIONING HARNESS ASSEMBLY- AIR CONDITIONING AMPLIFIER ASSEMBLY)

B

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY

C

5.CHECK FOR DTC

E

2.CHECK HARNESS AND CONNECTOR (NO. 2 AIR CONDITIONING HARNESS ASSEMBLY- AIR CONDITIONING AMPLIFIER ASSEMBLY)
a.

Disconnect the K19 No. 2 air conditioning harness assembly connector.


b.

Disconnect the E36 air conditioning amplifier assembly connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
K19-2 (RBUG) - E36-12 (RBUG) Always Below 1 Ω
K19-3 (RBUS) - E36-13 (RBUS) Always Below 1 Ω
K19-4 (RBBU) - E36-14 (RBBU) Always Below 1 Ω
K19-2 (RBUG) or E36-12 (RBUG) - Body ground Always 10 kΩ or higher
K19-3 (RBUS) or E36-13 (RBUS) - Body ground Always 10 kΩ or higher
K19-4 (RBBU) or E36-14 (RBBU) - Body ground Always 10 kΩ or higher




OK

3.CHECK REAR AIR MIX DAMPER SERVO MOTOR

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

3.CHECK REAR AIR MIX DAMPER SERVO MOTOR
a.

Replace the rear air mix damper servo motor RH*1 or LH*2 (See page Vehicle Interior>HEATING / AIR CONDITIONING>REAR AIR CONDITIONING UNIT (w/ Heater)>DISASSEMBLY).

*1: for LHD

*2: for RHD


HINT:

Since the servo motor cannot be inspected while it is removed from the vehicle, replace the servo motor with a normal one.






OK

END (REAR DAMPER SERVO MOTOR [for Front Passenger Side] WAS DEFECTIVE)

NG

4.CHECK NO. 2 AIR CONDITIONING HARNESS ASSEMBLY
4.CHECK NO. 2 AIR CONDITIONING HARNESS ASSEMBLY

OK

END (NO. 2 AIR CONDITIONING HARNESS ASSEMBLY WAS DEFECTIVE)

NG

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY