Use the same procedures for the LHD vehicle and RHD vehicle.
The procedures listed below are for the LHD vehicle.
55900
1.INSTALL AIR CONDITIONING CONTROL ASSEMBLY
Connect the connectors.
Insert the air conditioning control assembly and attach the 5 claws on its backside.
When inserting the air conditioning control assembly, do not press the knobs on it.
55406B
2.INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
55402C
3.INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH
55448A
4.INSTALL NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION
55403C
5.INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH
55449C
6.INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION
86140A
7.INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY (w/ Audio)
55412C
8.INSTALL NO. 1 CENTER INSTRUMENT CLUSTER FINISH PANEL (w/o Audio)
55680A
9.INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY
55670
10.INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY
55510F
11.INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY
12.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).