Use the same procedures for the LHD vehicle and RHD vehicle.
The procedures listed below are for the LHD vehicle.
55449C
1.REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION
55403C
2.REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH
55474C
3.REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH
55475A
4.REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH
55606
5.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)
55432D
6.REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL
84453
7.REMOVE IDLE UP SWITCH
| *A | w/ Entry and Start System |
| *B | w/o Entry and Start System |
Detach the 2 claws and remove the idle up switch.