Home › Vehicle Interior › INTERIOR PANELS / TRIM › INSTRUMENT PANEL SAFETY PAD › 2014.08–2015.08
RM2660E _58 Vehicle Interior _052849 INTERIOR PANELS / TRIM _0255717 INSTRUMENT PANEL SAFETY PAD A

INTERIOR PANELS / TRIM  INSTRUMENT PANEL SAFETY PAD  DISASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 55835A 1.REMOVE CENTER HEATER TO REGISTER DUCT

a.
B180538

Remove the 3 screws and center heater to register duct.


Hide 87212 2.REMOVE REAR NO. 1 AIR DUCT (w/ Rear Air Duct)

a.
B180539

Remove the 2 screws and rear No. 1 air duct.


Hide 55950G 4.REMOVE DEFROSTER NOZZLE ASSEMBLY

a.
B180544

Detach the 11 claws and remove the defroster nozzle.


Hide 55961B 5.REMOVE NO. 1 SIDE DEFROSTER NOZZLE

a.
B180541

Detach the 2 claws and remove the No. 1 side defroster nozzle.


Hide 55962 6.REMOVE NO. 2 SIDE DEFROSTER NOZZLE

a.
B180543

Detach the 3 claws and remove the No. 2 side defroster nozzle.


Hide 86101 8.REMOVE ANTENNA CORD SUB-ASSEMBLY (w/ Multi-display)

Hide 86101 9.REMOVE ANTENNA CORD SUB-ASSEMBLY (w/o Multi-display)

Hide 82142 10.REMOVE NO. 2 INSTRUMENT PANEL WIRE (for LHD)

a.

Detach the clamps and remove the No. 2 instrument panel wire from the instrument panel.

B180536


Hide 82142 11.REMOVE NO. 2 INSTRUMENT PANEL WIRE (for RHD)

a.

Detach the clamps and remove the No. 2 instrument panel wire from the instrument panel.

B190100