When a transmitter switch is pushed, the following occurs: 1) the door control receiver receives the transmitter signal; 2) the door control receiver sends a signal to the main body ECU; 3) the main body ECU sends the operation permission signal to the power window regulator motors; and 4) the power window motors are activated.
When the driver door key cylinder (key linked switch) is turned, the following occurs: 1) the door lock motor receives the signal; 2) the door lock motor sends the signal to the main body ECU; 3) the main body ECU sends the signal to the power window regulator motors; and 4) the power window motors are activated.
Check that all the doors can be locked and unlocked with the wireless transmitter and the driver side door key cylinder (key linked switch).
| Result | Proceed to |
|---|---|
| All doors can be locked and unlocked with transmitter and driver side door key cylinder | A |
| All doors cannot be locked and unlocked with transmitter (w/ Entry and Start System) | B |
| All doors cannot be locked and unlocked with transmitter (w/o Entry and Start System) | C |
| All doors cannot be locked and unlocked with driver side door key cylinder | D |
A
B
C
D
(See pageVehicle Interior>DOOR LOCK>POWER DOOR LOCK CONTROL SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING)
Check that all the power windows move when the manual up/down function of the master switch and regulator switch is operated (See page Vehicle Exterior>WINDOW / GLASS>POWER WINDOW CONTROL SYSTEM(for Models with Jam Protection Function on 4 Windows)>OPERATION CHECK).
All power windows move.
OK
NG
Check that all the power windows move when the remote up/down function of the master switch is operated (See page Vehicle Exterior>WINDOW / GLASS>POWER WINDOW CONTROL SYSTEM(for Models with Jam Protection Function on 4 Windows)>OPERATION CHECK).
All power windows move.
OK
NG