When the sliding roof drive gear sub-assembly (sliding roof ECU) detects a motor malfunction, and the sliding roof operation is stopped, DTC B2341 is stored. When the sliding roof drive gear sub-assembly (sliding roof ECU) detects a gear malfunction, and the sliding roof operation is stopped, DTC B2344 is stored.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| B2341 | Sensor (motor) failure | Sliding roof drive gear sub-assembly (sliding roof ECU) |
| B2344 | Position failure | Sliding roof drive gear sub-assembly (sliding roof ECU) |
Clear the DTCs (See page Vehicle Exterior>SLIDING ROOF / CONVERTIBLE>SLIDING ROOF SYSTEM>DTC CHECK / CLEAR).
Check for DTCs (See page Vehicle Exterior>SLIDING ROOF / CONVERTIBLE>SLIDING ROOF SYSTEM>DTC CHECK / CLEAR).
| Result | Proceed to |
|---|---|
| DTC B2341 or B2344 is output | A |
| DTC B2343 is output | B |
| No DTC is output | C |
A
B
C
(See pageGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING)