Home › Vehicle Exterior › DOOR / HATCH › FUEL LID LOCK CONTROL CABLE ASSEMBLY (for RHD) › 2014.08–2015.08
RM2660E _59 Vehicle Exterior _052852 DOOR / HATCH _0255753 FUEL LID LOCK CONTROL CABLE ASSEMBLY(for RHD) A

DOOR / HATCH  FUEL LID LOCK CONTROL CABLE ASSEMBLY(for RHD)  INSTALLATION  


PROCEDURE

Hide 77035 1.INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY

a.

Connect the cable to the clamps shown in the illustration to install the cable.

B182555


Hide 77377 2.INSTALL FUEL FILLER OPENING LID LOCK RETAINER

a.
B181055

Install the lock retainer and turn it clockwise as shown in the illustration.


b.
B181056

Install the cable and turn it clockwise as shown in the illustration.


Hide 77306 3.INSTALL FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY

a.
B181065

Connect the fuel lid lock control cable to the fuel lid lock open lever.


b.

Attach the 2 claws to install the fuel lid lock open lever.


Hide 71865A 5.INSTALL NO. 1 REAR SEAT COVER BEZEL (w/ Rear No. 2 Seat)

Hide 64937A 6.INSTALL NO. 1 TONNEAU COVER HOLDER CAP (w/ Tonneau Cover)

Hide 55317A 12.INSTALL INSTRUMENT SIDE PANEL RH (w/o Airbag Cut Off Switch)

Hide 55317A 13.INSTALL INSTRUMENT SIDE PANEL RH (w/ Airbag Cut Off Switch)

Hide 64910J 14.INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

Hide 15.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).