A bolt without a torque specification is shown in the standard bolt chart (See page General>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS).
84873A
1.INSTALL RETRACTABLE OUTER MIRROR SWITCH (w/ Retract Mirror)
Attach the 2 claws to install the switch.
84870A
2.INSTALL OUTER MIRROR SWITCH ASSEMBLY
Attach the 4 claws to install the switch.
55446A
3.INSTALL NO. 1 SWITCH HOLE BASE
55432D
4.INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL
55606
5.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)
55475A
6.INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH
55474C
7.INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH
55403C
8.INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH
55449C
9.INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION