Home › Vehicle Exterior › WIPER / WASHER › REAR WIPER MOTOR › 2014.08–2015.08
RM2660E _59 Vehicle Exterior _052854 WIPER / WASHER _0255783 REAR WIPER MOTOR A

WIPER / WASHER  REAR WIPER MOTOR  INSTALLATION  


PROCEDURE

Hide 85110R 1.INSTALL REAR WIPER MOTOR ASSEMBLY

a.
B181333

Temporarily install the rear wiper motor assembly with the 3 bolts.


b.

Tighten the 3 bolts.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)


c.

Connect the connector.


Hide 85143R 2.INSTALL REAR WIPER MOTOR GROMMET

Hide 85241A 3.INSTALL REAR WIPER ARM

Hide 67935B 4.INSTALL BACK DOOR GARNISH

Hide 84901 5.INSTALL DOOR OPENING SWITCH SUB-ASSEMBLY (for Face to Face Seat Type)

Hide 67848C 6.INSTALL NO. 2 BACK DOOR SERVICE HOLE COVER (for Face to Face Seat Type)

Hide 74611B 7.INSTALL ASSIST GRIP (for Face to Face Seat Type)

Hide 67938A 8.INSTALL BACK DOOR SIDE GARNISH LH

Hide 67937B 9.INSTALL BACK DOOR SIDE GARNISH RH

Hide 67939B 10.INSTALL CENTER BACK DOOR GARNISH