Use the same procedures for the RHD and LHD.
The procedures listed below are the LHD side.
1.INSTALL HEADLIGHT LEVELING SWITCH
Attach the 2 claws to install the switch.
55446A
2.INSTALL NO. 1 SWITCH HOLE BASE
55432D
3.INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL
55606
4.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)
55475A
5.INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH
55474C
6.INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH
55403C
7.INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH
55449C
8.INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION