Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
52119A
1.REMOVE FRONT BUMPER COVER
for Standard:
(See page Vehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER(for Standard)>REMOVAL)
w/ Winch:
(See page Vehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER(w/ Winch)>REMOVAL)
53883F
2.REMOVE FRONT FENDER MAIN SEAL LH
81150
3.REMOVE HEADLIGHT ASSEMBLY LH
Put protective tape around the headlight assembly LH.
|
Protective Tape |
Disconnect the 2 connectors.
Remove the 3 screws and bolt.
Pull the headlight assembly LH forward to remove it.