Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
52119A
1.REMOVE FRONT BUMPER COVER
for Standard:
(See page Vehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER(for Standard)>REMOVAL)
w/ Winch:
(See page Vehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER(w/ Winch)>REMOVAL)
52149
2.REMOVE FRONT BUMPER INNER BRACKET (for RH Side)
for Standard:
(See page Vehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER(for Standard)>DISASSEMBLY)
w/ Winch:
(See page Vehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER(w/ Winch)>DISASSEMBLY)
81220
3.REMOVE FOG LIGHT ASSEMBLY LH
Disconnect the connector.
Remove the 2 screws.
Detach the 2 guides and remove the fog light assembly LH.