53101
1.REMOVE RADIATOR GRILLE SUB-ASSEMBLY
85341A
2.REMOVE HEADLIGHT CLEANER WASHER NOZZLE COVER LH (w/ Headlight Cleaner System)
85341A
3.REMOVE HEADLIGHT CLEANER WASHER NOZZLE COVER RH (w/ Headlight Cleaner System)
Use the same procedure described for the LH side.
85208A
4.REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH (w/ Headlight Cleaner System)
85207A
5.REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH (w/ Headlight Cleaner System)
Use the same procedure described for the LH side.
85271C
6.REMOVE HEADLIGHT CLEANER HOSE (w/ Headlight Cleaner System)
52149
7.REMOVE FRONT BUMPER INNER BRACKET (w/ Fog Light)
Detach the 3 claws and remove the front bumper inner bracket.
81220
8.REMOVE FOG LIGHT ASSEMBLY LH (w/ Fog Light)
81210
9.REMOVE FOG LIGHT ASSEMBLY RH (w/ Fog Light)
Use the same procedure described for the LH side.
89341A
10.REMOVE NO. 1 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)
82114
11.REMOVE NO. 4 ENGINE ROOM WIRE
Detach the 10 clamps and remove the No. 4 engine room wire.
53104A
12.REMOVE LOWER RADIATOR GRILLE SUB-ASSEMBLY LH
Remove the 3 clips.
| *A | w/ Fog Light |
| *B | w/o Fog Light |
Detach the 10 claws and remove the lower radiator grille sub-assembly LH.
53103A
13.REMOVE LOWER RADIATOR GRILLE SUB-ASSEMBLY RH
Use the same procedure described for the LH side.
52128B
14.REMOVE FRONT BUMPER HOLE COVER LH (w/ Fog Light)
Remove the 3 screws.
Detach the 2 guides and remove the fog light bracket LH.
Remove the screw.
Detach the 4 claws and remove the front bumper hole cover LH.
52127D
15.REMOVE FRONT BUMPER HOLE COVER RH (w/ Fog Light)
Use the same procedure described for the LH side.
52126A
16.REMOVE FOG LIGHT MOUNTING BRACKET LH (w/ Fog Light)
Detach the 3 claws and remove the fog light mounting bracket LH.
52125A
17.REMOVE FOG LIGHT MOUNTING BRACKET RH (w/ Fog Light)
Use the same procedure described for the LH side.
52421A
18.REMOVE FRONT BUMPER PAD
Remove the 4 front bumper pad.
52542A
19.REMOVE FRONT BUMPER NO. 2 PROTECTOR
Remove the 2 front bumper No. 2 protectors.
52114A
20.REMOVE FRONT BUMPER EXTENSION MOUNTING BRACKET (w/ Bracket)
Remove the 2 bolts.
| *A | except China |
| *B | for China |
Detach the 2 claws and remove the front bumper extension mounting bracket.
52411
21.REMOVE FRONT BUMPER GUARD (w/ Garnish)
Remove the 6 nuts.
Detach the 4 claws and remove the front bumper guard.
52435
22.REMOVE FRONT BUMPER GUARD GARNISH (w/ Garnish)
Remove the 4 clips.
Detach the 6 guides and remove the front bumper guard garnish.
52412
23.REMOVE FRONT BUMPER NO. 2 GUARD (w/ Garnish)
Remove the 2 clips.
Detach the 15 claws and remove the front bumper No. 2 guard.