81590A
1.REMOVE REAR LIGHT ASSEMBLY LH
81580D
2.REMOVE REAR LIGHT ASSEMBLY RH
Use the same procedure described for the LH side.
76801
3.REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY
Put protective tape around the back door outside garnish sub-assembly.
| *a | Protective Tape |
Detach the 6 clips and remove the back door outside garnish sub-assembly.
58574A
4.REMOVE REAR FLOOR MAT REAR SUPPORT PLATE
64894
5.REMOVE BACK DOOR TRIM COVER LH
64893
6.REMOVE BACK DOOR TRIM COVER RH
64780A
7.REMOVE BACK DOOR TRIM PANEL ASSEMBLY
76802C
8.REMOVE NO. 2 BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY
Remove the 2 nuts and disconnect the connector.
Put protective tape around the No. 2 back door outside garnish sub-assembly.
| *a | Protective Tape | - | - |
Detach the 8 clips.
Pull out the wire harness of the license plate light from the tail gate, and remove the No. 2 back door outside garnish sub-assembly.
81270
9.REMOVE LICENSE PLATE LIGHT ASSEMBLY
75132C
10.REMOVE REAR LICENSE LIGHT COVER