1.INSTALL WINCH MAIN RELAY
Install the relay with the 3 nuts.
Connect the 2 wires with the 2 nuts.
Connect the connector.
53292A
2.INSTALL UPPER RADIATOR SUPPORT SEAL
for Gasoline Engine:
Install the upper radiator support seal (See page Engine / Hybrid System>1GR-FE (ENGINE MECHANICAL)>ENGINE ASSEMBLY>INSTALLATION).
for Diesel Engine:
Install the upper radiator support seal (See page Engine / Hybrid System>1VD-FTV (ENGINE MECHANICAL)>ENGINE ASSEMBLY>INSTALLATION).
3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).