Home › Engine / Hybrid System › 1GR-FE (ENGINE MECHANICAL) › REAR CRANKSHAFT OIL SEAL › from 2017.08
RM2660E _51 Engine / Hybrid System _052778 1GR-FE ENGINE MECHANICAL _0255059 REAR CRANKSHAFT OIL SEAL A

1GR-FE ENGINE MECHANICAL  REAR CRANKSHAFT OIL SEAL  REMOVAL  


PROCEDURE

Hide 32101 2.REMOVE DRIVE PLATE AND RING GEAR SUB-ASSEMBLY

Hide 11381A 3.REMOVE REAR CRANKSHAFT OIL SEAL

a.
A076328E07
0.448,0.229 0.302,0.229 0.302,0.229 0.74,1.573 false 0.479,0.146 0.781,0.396 0.302,0.25 10 true *1

Using a knife, cut off the lip of the oil seal.

Text in Illustration
*1 Cut Position


b.

Using a screwdriver, pry out the oil seal.

NOTICE:

Do not damage the surface of the oil seal press fit hole or crankshaft.


HINT:

Tape the screwdriver tip before use.