| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | GENERATOR ASSEMBLY | 27060 | - | - | - |
| 2 | TEMPERATURE SENSOR | 89429F | ( ) |
- | - |
| ● | Non-reusable part | - | - |
To prevent burns, do not remove the temperature sensor while the engine is hot.
27060 1.REMOVE GENERATOR ASSEMBLY
for DENSO Made:
Click herePower Source / Network>V35A-FTS (BATTERY / CHARGING)>GENERATOR (for DENSO Made)>REMOVAL
for VALEO Made:
Click herePower Source / Network>V35A-FTS (BATTERY / CHARGING)>GENERATOR (for VALEO Made)>REMOVAL
89429F 2.REMOVE TEMPERATURE SENSOR
|
|
Disconnect the temperature sensor connector.
Using a 19 mm deep socket wrench, remove the temperature sensor.
If the temperature sensor has been struck or dropped, replace it.
Remove the gasket from the temperature sensor.