| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | PRECAUTION | - | ( ) |
- | - |
| 2 | INSTRUMENT PANEL SAFETY PAD ASSEMBLY | - | - | - | - |
| 3 | DEFROSTER NOZZLE ASSEMBLY | 55950G | - | - | - |
| 4 | ANTENNA DIVIDER | 86681C | - | - | - |
The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed, installed or replaced during the antenna divider removal/installation are shown below.
When the cable is disconnected/reconnected to the battery terminal, systems temporarily stop operating. However, each system has a function that completes learning the first time the system is used.
Learning completes when vehicle is driven
Learning completes when vehicle is operated normally
1. PRECAUTION
2.REMOVE INSTRUMENT PANEL SAFETY PAD ASSEMBLY
55950G 3.REMOVE DEFROSTER NOZZLE ASSEMBLY
86681C 4.REMOVE ANTENNA DIVIDER