| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | INTEGRATION CONTROL AND PANEL SUB-ASSEMBLY | 84012 | - | - | - |
| 2 | LOWER INSTRUMENT PANEL | 55312 | ( ) |
- | - |
| 3 | TRIP SWITCH | 84975 | ( ) |
- | - |
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
84012 1.REMOVE INTEGRATION CONTROL AND PANEL SUB-ASSEMBLY
84975 3.REMOVE TRIP SWITCH
Using a thin-bladed screwdriver, detach the claw and remove the trip switch.
Tape the thin-bladed screwdriver tip before use.