53292A 1.REMOVE UPPER RADIATOR SUPPORT SEAL
for Standard:
Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER (for Standard)>REMOVAL
for Aero Type:
Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER (for Aero Type)>REMOVAL
2.RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM
3.REMOVE PIPING CLAMP (for Engine Room Side)
| *1 | No. 3 Air Conditioning Tube and Accessory Assembly |
| *2 | Cooler Refrigerant Liquid Pipe A |
| *a | SST |
Install SST to the piping clamp as shown in the illustration.
| *a | Push in |
Hold the No. 3 air conditioning tube and accessory assembly and cooler refrigerant liquid pipe A with each hand and push in SST with both thumbs.
Do not apply excessive force to the No. 3 air conditioning tube and accessory assembly or cooler refrigerant liquid pipe A as they may bend.
| *1 | Cooler Refrigerant Liquid Pipe A |
| *a | Stopper |
| *b | Pull off |
Raise the stopper of SST and remove SST and the piping clamp together from the No. 3 air conditioning tube and accessory assembly and cooler refrigerant liquid pipe A.
Remove the piping clamp from SST.
Remove the No. 3 air conditioning tube and accessory assembly from the cooler refrigerant liquid pipe A.
Remove the 2 O-rings from the No. 3 air conditioning tube and accessory assembly.
Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
4.REMOVE PIPING CLAMP (for Air Conditioning Unit Side)