| ● | Non-reusable part | - | - |
| *1 | COOLING UNIT CASE LH | *2 | COOLING UNIT CASE RH |
| ● | Non-reusable part | - | - |
87030 1.REMOVE AIR CONDITIONING BLOWER ASSEMBLY
87217E 2.REMOVE REAR NO. 2 SIDE AIR DUCT
87217D 3.REMOVE REAR NO. 1 SIDE AIR DUCT
87236C 4.REMOVE HEATER BLOWER COVER
87103D 5.REMOVE REAR BLOWER MOTOR WITH FAN SUB-ASSEMBLY
88561P 6.REMOVE REAR NO. 1 AIR CONDITIONING UNIT PACKING
88605 8.REMOVE NO. 1 COOLER WIRING HARNESS SUB-ASSEMBLY
| *A | w/ Magnet Valve | - | - |
11.REMOVE HEATER CLAMP
88501R 12.REMOVE EVAPORATOR SUB-ASSEMBLY (REAR)
Disconnect the 3 connectors.
Detach the clamp.
Remove the 12 screws.
Detach the claw and remove the rear cooling unit cover LH.
|
Remove in this Direction | - | - |
Remove the evaporator sub-assembly (rear) with the rear cooling unit cover RH.
Remove the 2 O-rings from the evaporator sub-assembly (rear).
Seal the openings of the disconnected parts using vinyl tape to prevent the entry of moisture and foreign matter.
88605C 13.REMOVE NO. 2 COOLER WIRING HARNESS SUB-ASSEMBLY