CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY
Disconnect the I33 air conditioning amplifier assembly connector.
Measure the voltage and resistance according to the value(s) in the table below.
| Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
| I33-5 (B) - Body ground | Power source (+B) | Always | 11 to 14 V |
| I33-6 (IG+) - Body ground | Power source (IG) | Ignition switch ON | 11 to 14 V |
| Ignition switch off | Below 1 V | ||
| I33-17 (GND) - Body ground | Ground | Always | Below 1 Ω |
Reconnect the I33 air conditioning amplifier assembly connector.
Measure the pulses according to the value(s) in the table below.
| Tester Connection | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
| I33-7 (LIN1) - Body ground | LIN communication line | Ignition switch ON | Pulse generation |
CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU), POWER DISTRIBUTION BOX ASSEMBLY
| *1 | Power Distribution Box Assembly | *2 | Main Body ECU (Multiplex Network Body ECU) |
Remove the main body ECU (multiplex network body ECU) from the power distribution box assembly.
for LHD:
Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU (for LHD)>REMOVAL
for RHD:
Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU (for RHD)>REMOVAL
Connect the power distribution box assembly connectors.
Measure the voltage and resistance according to the value(s) in the table below.
| Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
| A-27 (IGR) - Body ground | Ignition power supply | Ignition switch ON | 11 to 14 V |
| Ignition switch off | Below 1 V | ||
| A-26 (BECU) - Body ground | Battery power supply | Always | 11 to 14 V |
| A-13 (GND1) - Body ground | Ground | Always | Below 1 Ω |
| A-14 (GND2) - Body ground | Ground | Always | Below 1 Ω |
Install the main body ECU (multiplex network body ECU).
Measure the voltage and resistance according to the value(s) in the table below.
| Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
| 5J-1 - Body ground | Power source (+B) | Always | 11 to 14 V |
| 5B-44 - Body ground | Ground | Always | Below 1 Ω |
| 5C-25 - Body ground | Ground | Always | Below 1 Ω |
| 5F-43 - Body ground | Rear window defogger signal | Ignition switch ON, window defogger switch on | 11 to 14 V |
| Ignition switch ON, window defogger switch off | Below 1 V |