| *A | w/o Wire Harness | - | - |
|
Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft.*lbf) |
|
N*m (kgf*cm, ft.*lbf) : Specified torque |
| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 16 | REAR NO. 1 SEAT ASSEMBLY LH | - | - | - | - |
| 17 | REAR NO. 1 SEAT ASSEMBLY RH | - | - | - | - |
Wear protective gloves. Sharp areas on the parts may injure your hands.
There is risk of injury.
73390C 1.INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY LH
72998D 3.INSTALL REAR SEAT CUSHION COVER LH
71301H 4.INSTALL REAR NO. 1 SEAT HINGE SUB-ASSEMBLY RH
71302G 5.INSTALL REAR NO. 1 SEAT HINGE SUB-ASSEMBLY LH
82194 6.INSTALL REAR SEAT WIRE LH (w/o Wire Harness)
79967X 7.INSTALL REAR NO. 1 SEAT NO. 5 LEG SIDE COVER
79967W 8.INSTALL REAR NO. 1 SEAT NO. 4 LEG SIDE COVER
79951B 9.INSTALL NO. 1 SEAT NO. 1 CUSHION COVER
79952A 10.INSTALL NO. 1 SEAT NO. 2 CUSHION COVER
78950F 11.INSTALL NO. 1 FOLD SEAT STOPPER BAND ASSEMBLY
71834X 12.INSTALL REAR NO. 2 SEAT RECLINING COVER LH
72329G 14.INSTALL REAR NO. 2 SEAT ADJUSTER BOLT COVER
71833V 15.INSTALL NO. 1 SEAT NO. 2 RECLINING COVER RH
16.INSTALL REAR NO. 1 SEAT ASSEMBLY LH
17.INSTALL REAR NO. 1 SEAT ASSEMBLY RH
for 60/40 Split Seat Type:
Click hereVehicle Interior>SEAT>REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Seat Type RH Side)>INSTALLATION
for 40/20/40 Split Seat Type:
Click hereVehicle Interior>SEAT>REAR NO. 1 SEAT ASSEMBLY (for 40/20/40 Split Seat Type RH Side)>INSTALLATION