Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
82644 1.INSTALL SEMICONDUCTOR POWER INTEGRATION ECU
|
Install in this Direction | - | - |
Attach the claw to connect the lever connector.
Be sure to connect the lever connector securely.
Connect the connector.
Attach the claw to install the semiconductor power integration ECU as shown in the illustration.
82661 2.INSTALL NO. 1 RELAY BLOCK COVER
3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
4. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE
When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART