CHECK POWER DISTRIBUTION BOX ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)
| *1 | Power Distribution Box Assembly | *2 | Main body ECU (multiplex network body ECU) |
Remove the main body ECU (multiplex network body ECU) from the power distribution box assembly.
for LHD: Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU (for LHD)>REMOVAL
for RHD: Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU (for RHD)>REMOVAL
Reconnect the power distribution box assembly connectors.
Measure the voltage and resistance according to the value(s) in the table below.
| Tester Connection | Input/Output | Terminal Description | Condition | Specified Condition | Related Data List Item |
|---|---|---|---|---|---|
| A-13 (GND1) - Body ground | - | Ground | Always | Below 1 Ω | - |
| A-14 (GND2) - Body ground | - | Ground | Always | Below 1 Ω | - |
| A-26 (BECU) - Body ground | Input | Battery power supply | Ignition switch off | 11 to 14 V | - |
| A-27 (IGR) - Body ground | Input | IG power supply | Ignition switch ON | 11 to 14 V | IGR Power |
| Ignition switch off | Below 1 V |
Install the main body ECU (multiplex network body ECU) to the power distribution box assembly.
for LHD: Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU (for LHD)>INSTALLATION
for RHD: Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU (for RHD)>INSTALLATION
Measure the voltage and check for pulses according to the value(s) in the table below.
| Tester Connection | Input/Output | Terminal Description | Condition | Specified Condition | Related Data List Item |
|---|---|---|---|---|---|
| 5F-3 (FLCY) - Body ground | Input | Front door courtesy light switch assembly LH input | Front door LH open → closed | Below 1 V → 4.7 to 5.3 V | FL Door Courtesy Switch Status |
| 5F-5 (FRCY) - Body ground | Input | Front door courtesy light switch assembly RH input | Front door RH open → closed | Below 1 V → 4.7 to 5.3 V | FR Door Courtesy Switch Status |
| 5F-26 (LCTY) - Body ground | Input | Rear door courtesy light switch assembly LH input | Rear door LH open → closed | Below 1 V → 4.7 to 5.3 V | RL Door Courtesy Switch Status |
| 5F-1 (RCTY) - Body ground | Input | Rear door courtesy light switch assembly RH input | Rear door RH open → closed | Below 1 V → 4.7 to 5.3 V | RR Door Courtesy Switch Status |
| I3-28 (L2) - Body ground | Input | Driver door key-linked lock input | Driver door key cylinder turned to neutral position → on (lock) | Pulse generation → Below 1 V | Door Lock Switch Status by a Mechanical Key (D/P Door) |
| I3-4 (UL3) - Body ground | Input | Driver door key-linked unlock input | Driver door key cylinder turned to neutral position → on (unlock) | Pulse generation → Below 1 V | Door Unlock Switch Status by a Mechanical Key (D Door) |
| I2-2 (ACTG) - Body ground*2 | Output | Collision door lock release signal | Collision door lock release function does not operate | Below 2 V*3 7.3 to 9.9 V*4 |
- |
| Collision door lock release function operates | Below 1 V | ||||
| 5F-14 (ACT+) - Body ground | Output | Door lock motor lock drive output | Door control switch or door key cylinder off → on (lock) | Below 1 V → 11 to 14 V → Below 1 V | - |
| 5F-15 (ACT+) - Body ground | Output | Door lock motor lock drive output | Door control switch or door key cylinder off → on (lock) | Below 1 V → 11 to 14 V → Below 1 V | - |
| 5B-34 (ACT+) - Body ground | Output | Door lock motor lock drive output | Door control switch or door key cylinder off → on (lock) | Below 1 V → 11 to 14 V → Below 1 V | - |
| 5B-19 (ACT+) - Body ground | Output | Door lock motor lock drive output | Door control switch or door key cylinder off → on (lock) | Below 1 V → 11 to 14 V → Below 1 V | - |
| 5C-36 (ACT-) - Body ground | Output | Door lock motor lock drive output | Door control switch or door key cylinder off → on (unlock) | Below 1 V → 11 to 14 V → Below 1 V | - |
| 5F-36 (ACT-) - Body ground | Output | Door lock motor lock drive output | Door control switch or door key cylinder off → on (unlock) | Below 1 V → 11 to 14 V → Below 1 V | - |
| 5F-37 (ACT-) - Body ground | Output | Door lock motor lock drive output | Door control switch or door key cylinder off → on (unlock) | Below 1 V → 11 to 14 V → Below 1 V | - |
| 5B-20 (ACTD) - Body ground | Output | Driver door lock motor unlock drive output | Door control switch or driver door key cylinder off → on (unlock) | Below 1 V → 11 to 14 V → Below 1 V | - |
| I3-3 (LSFR) - Body ground | Input | Front door RH unlock detection switch input | Front door RH locked → unlocked | Pulse generation → Below 1 V | FR Door Lock Position Switch Status |
| I3-9 (LSFL) - Body ground | Input | Front door LH unlock detection switch input | Front door LH locked → unlocked | Pulse generation → Below 1 V | FL Door Lock Position Switch Status |
| I2-23 (LSWR) - Body ground | Input | Rear door RH unlock detection switch input | Rear door RH locked → unlocked | Pulse generation → Below 1 V | RR Door Lock Position Switch Status |
| I3-10 (LSWL) - Body ground | Input | Rear door LH unlock detection switch signal | Rear door LH locked → unlocked | Pulse generation → Below 1 V | RL Door Lock Position Switch Status |
| 5F-2 (BCTY) - Body ground | Input | Back door courtesy light switch input | Back door closed | Below 1 V | Back door courtesy light switch signal |
| Back door open | Pulse generation | ||||
| 5F-39 (TR+) - Body ground*1 | Output | Back door lock motor drive output | Back door closed → open | Below 1 V → 11 to 14 V → Below 1 V | Back Door Lock Position Status |
| I2-6 (L1) - Body ground*5 | Input | Front passenger door control switch input | Front passenger door control switch off → on (lock) | Pulse generation → Below 1 V | Manual Door Lock Switch (D/P Door) |
| I2-7 (UL1) - Body ground*5 | Input | Front passenger door control switch input | Front passenger door control switch off → on (unlock) | Pulse generation → Below 1 V | Manual Door Unlock Switch (D/P Door) |
| 5C-43 (GSW) - Body ground | Input | Collision detection input | Ignition switch ON | 2.9 to 4.2 V | - |
*1: w/o Power Back Door System
*2: w/ Door Control Battery
*3: Door control battery not charged
*4: Door control battery charging or charged
*5: w/ Door Control Switch Assembly
CHECK CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)
Disconnect the I39 certification ECU (smart key ECU assembly) connector.
Measure the voltage and resistance according to the value(s) in the table below.
| Tester Connection | Input/Output | Terminal Description | Condition | Specified Condition | Related Data List Item |
|---|---|---|---|---|---|
| I39-29 (E) - Body ground | - | Ground | Always | Below 1 Ω | - |
| I39-6 (+B) - Body ground | Input | Power supply | Ignition switch off | 11 to 14 V | - |
Reconnect the I39 certification ECU (smart key ECU assembly) connector.
Measure the voltage and check for pulses according to the value(s) in the table below.
| Tester Connection | Input/Output | Terminal Description | Condition | Specified Condition | Related Data List Item |
|---|---|---|---|---|---|
| I38-16 (TSW5) - Body ground | Input | Back door opener switch input | Back door opener switch assembly (open switch) off → on | Below 1 V → Pulse generation |
Entry & Start
Tr/B-Door Unlock SW |
CHECK DOUBLE LOCK DOOR CONTROL RELAY ASSEMBLY (w/ Double Locking System)
Disconnect the I152 double lock door control relay assembly connector.
Measure the voltage and resistance according to the value(s) in the table below.
| Tester Connection | Input/Output | Terminal Description | Condition | Specified Condition | Related Data List Item |
|---|---|---|---|---|---|
| I152-12 (+B) - Body ground | Input | Battery power supply | Ignition switch off | 11 to 14 V | - |
| I152-11 (CPUB) - Body ground | Input | Battery power supply | Ignition switch off | 11 to 14 V | - |
| I152-7 (GND) - Body ground | - | Ground | Always | Below 1 Ω | - |
Reconnect the I152 double lock door control relay assembly connector.
Measure the voltage and check for pulses according to the value(s) in the table below.
| Tester Connection | Input/Output | Terminal Description | Condition | Specified Condition | Related Data List Item |
|---|---|---|---|---|---|
| I152-8 (ACTS) - Body ground | Output | All door double lock motor set on output | Double lock unset → set | Below 1 V → 11 to 14 V | - |
| I152-1 (ACTR) - Body ground | Output | All door double lock motor set off output | Double lock set → unset | Below 1 V → 11 to 14 V | - |
| I152-6 (DLPD) - Body ground | Input | Driver door double lock position switch input | Double lock unset → set | Pulse generation → Below 1 V | - |
| I152-5 (DLPP) - Body ground | Input | Front passenger door double lock position switch input | Double lock unset → set | Pulse generation → Below 1 V | - |
| I152-4 (DLPR) - Body ground | Input | Rear door RH double lock position switch input | Double lock unset → set | Pulse generation → Below 1 V | - |
| I152-3 (DLPL) - Body ground | Input | Rear door LH double lock position switch input | Double lock unset → set | Pulse generation → Below 1 V | - |
CHECK AIRBAG ECU ASSEMBLY
Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>TERMINALS OF ECU