Home › Suspension › SUSPENSION CONTROL › ADAPTIVE VARIABLE SUSPENSION SYSTEM
RM38G0E _53 Suspension _100546 SUSPENSION CONTROL _0469072 ADAPTIVE VARIABLE SUSPENSION SYSTEM C

SUSPENSION CONTROL  ADAPTIVE VARIABLE SUSPENSION SYSTEM  C1781  Suspension Control ECU Malfunction  


DESCRIPTION

If a malfunction in the absorber control ECU is detected, DTC C1781 is stored.

DTC No. Detection Item DTC Detection Condition Trouble Area Warning Indicate Memory
C1781 Suspension Control ECU Malfunction One of the following conditions is met:
·

A nonvolatile memory write or read error occurs.

·

A CAN communication register is stuck.

·

An overheat protection function malfunction occurs.


·

Absorber control ECU

·

CAN communication system


Does not come on Yes

DTC Detection Conditions: C1781
Vehicle Condition
Pattern 1 Pattern 2 Pattern 3 Pattern 4
Diagnosis Condition Ignition switch is ON ○ ○ ○ ○
Malfunction Status A nonvolatile memory write error occurs ○ - - -
A nonvolatile memory read error occurs - ○ - -
A CAN communication register is stuck - - ○ -
An overheat protection function malfunction occurs - - - ○
Detection Time - - - -
Number of Trips 1 trip 1 trip 1 trip 1 trip

CAUTION / NOTICE / HINT

NOTICE:
·

Before performing troubleshooting, inspect the connectors of related circuits.

·

If DTC C1782 (Power Source Voltage Malfunction) is output at the same time, perform troubleshooting for C1782 first.

Click hereSuspension>SUSPENSION CONTROL>ADAPTIVE VARIABLE SUSPENSION SYSTEM>C1782

·

Before replacing the absorber control ECU, perform all of the following:

-

DTC inspection.

*

If no malfunctions are found in other areas, replace the absorber control ECU.



·

After replacing the absorber control ECU with a new one, perform registration of vehicle identification information.

Click hereSuspension>SUSPENSION CONTROL>ADAPTIVE VARIABLE SUSPENSION SYSTEM>TEST MODE PROCEDURE



PROCEDURE

1.CHECK FOR DTCS (CAN COMMUNICATION SYSTEM)
a.

Check for DTCs.

Chassis > Adaptive Variable Suspension System > Trouble Codes
50001 171

Result:
Result Proceed to
CAN DTCs are not output A
CAN DTCs are output B



A

REPLACE ABSORBER CONTROL ECU

B

GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING)