Home › Vehicle Exterior › SLIDING ROOF / CONVERTIBLE › SLIDING ROOF SYSTEM
RM38G0E _59 Vehicle Exterior _100826 SLIDING ROOF / CONVERTIBLE _0469275 SLIDING ROOF SYSTEM J

SLIDING ROOF / CONVERTIBLE  SLIDING ROOF SYSTEM  Remote Control System does not Operate  


DESCRIPTION

The main body ECU (multiplex network body ECU) receives remote control signals from the driver door key cylinder or electrical key transmitter sub-assembly.* Then, the main body ECU (multiplex network body ECU) activates the power window motor and sends the remote control signals to the sliding roof ECU (sliding roof drive gear assembly) via LIN communication. The sliding roof ECU (sliding roof drive gear assembly) receives those signals and activates the sliding roof motor.

*: w/ Wireless Transmitter-linked Function


CAUTION / NOTICE / HINT

NOTICE:
·

The sliding roof key-linked function and sliding roof wireless transmitter-linked function can be customized. Make sure that the customize settings of both functions are set to ON.

Click hereVehicle Exterior>SLIDING ROOF / CONVERTIBLE>SLIDING ROOF SYSTEM>CUSTOMIZE PARAMETERS

·

If the sliding roof ECU (sliding roof drive gear assembly) is removed and reinstalled or replaced, the sliding roof ECU (sliding roof drive gear assembly) must be initialized.

Click hereVehicle Exterior>SLIDING ROOF / CONVERTIBLE>SLIDING ROOF SYSTEM>INITIALIZATION

·

The sliding roof system uses the CAN and LIN communication systems. First, confirm that there are no malfunctions in the CAN and LIN communication systems. Refer to How to Proceed with Troubleshooting.

Click hereVehicle Exterior>SLIDING ROOF / CONVERTIBLE>SLIDING ROOF SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING

·

If a sliding roof ECU (sliding roof drive gear assembly) DTC is output, first perform troubleshooting for the sliding roof ECU (sliding roof drive gear assembly) DTC.

·

Before replacing the main body ECU (multiplex network body ECU) refer to Service Bulletin.



PROCEDURE

1.CHECK VEHICLE TYPE
a.

Check the vehicle type.


Result:
Result Proceed to
w/o Wireless Transmitter-linked Function A
w/ Wireless Transmitter-linked Function B



A

2.CHECK REMOTE CONTROL FUNCTION

B

7.CHECK REMOTE CONTROL FUNCTION
2.CHECK REMOTE CONTROL FUNCTION

Result:
Result Proceed to
Both the power windows and sliding roof operate by the key-linked function. A
The sliding roof does not operate by the key-linked function, but all of the power windows operate. B
Both the power windows and sliding roof do not operate by the key-linked function. C



A

B

3.CHECK SLIDING ROOF OPERATION

C

3.CHECK SLIDING ROOF OPERATION
a.

Check the sliding roof operation.

Click hereVehicle Exterior>SLIDING ROOF / CONVERTIBLE>SLIDING ROOF SYSTEM>OPERATION CHECK

OK:

Sliding roof operates normally.



Result:
Proceed to
OK
NG



OK

4.REPLACE SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY)

NG

GO TO OTHER PROBLEM (Sliding Roof does not Move by Operating Sliding Roof Control Switch)

4.REPLACE SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY)
a.

Replace the sliding roof ECU (sliding roof drive gear assembly).

Click hereVehicle Exterior>SLIDING ROOF / CONVERTIBLE>SLIDING ROOF HOUSING>REMOVAL


Result:
Proceed to
NEXT



NEXT

5.INITIALIZE SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY)
5.INITIALIZE SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY)
a.

Initialize the sliding roof ECU (sliding roof drive gear assembly).

Click hereVehicle Exterior>SLIDING ROOF / CONVERTIBLE>SLIDING ROOF SYSTEM>INITIALIZATION


Result:
Proceed to
NEXT



NEXT

6.CHECK REMOTE CONTROL FUNCTION
6.CHECK REMOTE CONTROL FUNCTION
a.

Check the key-linked function.

Click hereVehicle Exterior>SLIDING ROOF / CONVERTIBLE>SLIDING ROOF SYSTEM>OPERATION CHECK

OK:

The key-linked function operates normally.



Result:
Proceed to
OK
NG



OK

END (SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY) WAS DEFECTIVE)

NG

7.CHECK REMOTE CONTROL FUNCTION
a.

Check the key-linked and wireless transmitter-linked functions.

Click hereVehicle Exterior>SLIDING ROOF / CONVERTIBLE>SLIDING ROOF SYSTEM>OPERATION CHECK


Result:
Result Proceed to
Both the power windows and sliding roof operate by the key-linked and wireless transmitter-linked functions. A
The sliding roof does not operate by the key-linked or wireless transmitter-linked function, but all of the power windows operate. B
Both the power windows and sliding roof do not operate by the key-linked or wireless transmitter-linked function. C



A

B

8.CHECK SLIDING ROOF OPERATION

C

8.CHECK SLIDING ROOF OPERATION
a.

Check the sliding roof operation.

Click hereVehicle Exterior>SLIDING ROOF / CONVERTIBLE>SLIDING ROOF SYSTEM>OPERATION CHECK

OK:

Sliding roof operates normally.



Result:
Proceed to
OK
NG



OK

9.REPLACE SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY)

NG

GO TO OTHER PROBLEM (Sliding Roof does not Move by Operating Sliding Roof Control Switch)

9.REPLACE SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY)
a.

Replace the sliding roof ECU (sliding roof drive gear assembly).

Click hereVehicle Exterior>SLIDING ROOF / CONVERTIBLE>SLIDING ROOF HOUSING>REMOVAL


Result:
Proceed to
NEXT



NEXT

10.INITIALIZE SLIDING ROOF DRIVE GEAR ASSEMBLY
10.INITIALIZE SLIDING ROOF DRIVE GEAR ASSEMBLY
a.

Initialize the sliding roof ECU (sliding roof drive gear assembly).

Click hereVehicle Exterior>SLIDING ROOF / CONVERTIBLE>SLIDING ROOF SYSTEM>INITIALIZATION


Result:
Proceed to
NEXT



NEXT

11.CHECK REMOTE CONTROL FUNCTION
11.CHECK REMOTE CONTROL FUNCTION
a.

Check the key-linked and wireless transmitter-linked functions.

Click hereVehicle Exterior>SLIDING ROOF / CONVERTIBLE>SLIDING ROOF SYSTEM>OPERATION CHECK

OK:

The key-linked and wireless transmitter-linked functions operate normally.



Result:
Proceed to
OK
NG



OK

END (SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY) WAS DEFECTIVE)

NG