| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | SUPPORT REAR AXLE HOUSING ASSEMBLY | - | ( ) |
- | - |
| 2 | REAR LATERAL CONTROL ROD ASSEMBLY | 48740 | ( ) |
- | - |
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the rear lateral control rod assembly removal/installation are shown below.
48740 2.REMOVE REAR LATERAL CONTROL ROD ASSEMBLY
Remove the bolt (A).
Hold the nut and remove the bolt (B) and rear lateral control rod assembly.