Home › Engine / Hybrid System › V35A-FTS (ENGINE CONTROL) › SFI SYSTEM
RM38G0E _51 Engine / Hybrid System _100526 V35A-FTS ENGINE CONTROL _0470271 SFI SYSTEM C

V35A-FTS ENGINE CONTROL  SFI SYSTEM  P020113  Cylinder 1 Injector "A" Circuit Open  P020213  Cylinder 2 Injector "A" Circuit Open  P020313  Cylinder 3 Injector "A" Circuit Open  P020413  Cylinder 4 Injector "A" Circuit Open  P020513  Cylinder 5 Injector "A" Circuit Open  P020613  Cylinder 6 Injector "A" Circuit Open  P062D13  Fuel Injector Driver Circuit Performance Bank 1 Circuit Open  


DESCRIPTION

The D-4S system has two fuel injection systems. One is an in-cylinder direct injection system that directly injects pressurized fuel into the combustion chamber. The other is an intake port injection system. The ECM determines which fuel injection system to use in accordance with the engine conditions. The direct injection system uses an injector driver (EDU) built into the ECM to rapidly operate the direct fuel injector assemblies. It converts injection request signals from the ECM to high-voltage and high-current injector-drive signals that drive the direct fuel injector assemblies.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Note
P020113 Cylinder 1 Injector "A" Circuit Open Any of following conditions is met (1 trip detection logic):
·

Short to +B in direct fuel injector assembly (No. 1 cylinder) circuit for 40 times or more.

·

Open or short to ground in direct fuel injector assembly (No. 1 cylinder) circuit for 20 times or more.

·

Direct fuel injector assembly (No. 1 cylinder) circuit current reaches the high limit for 20 times or more.


·

Open or short in direct fuel injector assembly (No. 1 cylinder) circuit

·

Direct fuel injector assembly (No. 1 cylinder)

·

EDU relay

·

ECM


Comes on SAE: P0201
P020213 Cylinder 2 Injector "A" Circuit Open Any of following conditions is met (1 trip detection logic):
·

Short to +B in direct fuel injector assembly (No. 2 cylinder) circuit for 40 times or more.

·

Open or short to ground in direct fuel injector assembly (No. 2 cylinder) circuit for 20 times or more.

·

Direct fuel injector assembly (No. 2 cylinder) circuit current reaches the high limit for 20 times or more.


·

Open or short in direct fuel injector assembly (No. 2 cylinder) circuit

·

Direct fuel injector assembly (No. 2 cylinder)

·

EDU relay

·

ECM


Comes on SAE: P0202
P020313 Cylinder 3 Injector "A" Circuit Open Any of following conditions is met (1 trip detection logic):
·

Short to +B in direct fuel injector assembly (No. 3 cylinder) circuit for 40 times or more.

·

Open or short to ground in direct fuel injector assembly (No. 3 cylinder) circuit for 20 times or more.

·

Direct fuel injector assembly (No. 3 cylinder) circuit current reaches the high limit for 20 times or more.


·

Open or short in direct fuel injector assembly (No. 3 cylinder) circuit

·

Direct fuel injector assembly (No. 3 cylinder)

·

EDU relay

·

ECM


Comes on SAE: P0203
P020413 Cylinder 4 Injector "A" Circuit Open Any of following conditions is met (1 trip detection logic):
·

Short to +B in direct fuel injector assembly (No. 4 cylinder) circuit for 40 times or more.

·

Open or short to ground in direct fuel injector assembly (No. 4 cylinder) circuit for 20 times or more.

·

Direct fuel injector assembly (No. 4 cylinder) circuit current reaches the high limit for 20 times or more.


·

Open or short in direct fuel injector assembly (No. 4 cylinder) circuit

·

Direct fuel injector assembly (No. 4 cylinder)

·

EDU relay

·

ECM


Comes on SAE: P0204
P020513 Cylinder 5 Injector "A" Circuit Open Any of following conditions is met (1 trip detection logic):
·

Short to +B in direct fuel injector assembly (No. 5 cylinder) circuit for 40 times or more.

·

Open or short to ground in direct fuel injector assembly (No. 5 cylinder) circuit for 20 times or more.

·

Direct fuel injector assembly (No. 5 cylinder) circuit current reaches the high limit for 20 times or more.


·

Open or short in direct fuel injector assembly (No. 5 cylinder) circuit

·

Direct fuel injector assembly (No. 5 cylinder)

·

EDU relay

·

ECM


Comes on SAE: P0205
P020613 Cylinder 6 Injector "A" Circuit Open Any of following conditions is met (1 trip detection logic):
·

Short to +B in direct fuel injector assembly (No. 6 cylinder) circuit for 40 times or more.

·

Open or short to ground in direct fuel injector assembly (No. 6 cylinder) circuit for 20 times or more.

·

Direct fuel injector assembly (No. 6 cylinder) circuit current reaches the high limit for 20 times or more.


·

Open or short in direct fuel injector assembly (No. 6 cylinder) circuit

·

Direct fuel injector assembly (No. 6 cylinder)

·

EDU relay

·

ECM


Comes on SAE: P0206
P062D13 Fuel Injector Driver Circuit Performance Bank 1 Circuit Open Open or short in direct fuel injector assembly (all cylinders) circuits for 60 times or more (1 trip detection logic).
·

Open or short in direct fuel injector assembly circuit

·

Direct fuel injector assembly

·

EDU relay

·

ECM


Comes on SAE: P062D

MONITOR DESCRIPTION

The fuel injection sequence occurs in numerical order from No. 1 to No. 6.

The ECM monitors the Injector Driver (EDU) at all times. If drivers or direct fuel injector assembly is malfunctioning, the EDU sends direct fuel injector assembly operation condition signals (fail signals) to the ECM. When the ECM receives the signals, the ECM stops the fuel injection control of the appropriate cylinders, cuts voltage to the appropriate EDU relay, and illuminates the MIL.

MONITOR STRATEGY

Required Sensors/Components (Main) Direct fuel injector assembly
ECM (injector driver)
Frequency of Operation Continuous

CONFIRMATION DRIVING PATTERN

1.

Connect the GTS to the DLC3.

2.

Turn the ignition switch to ON.

3.

Turn the GTS on.

4.

Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure).

5.

Turn the ignition switch off and wait for at least 30 seconds.

6.

Start the engine [A].

7.

Idle the engine for 15 seconds or more [B].

8.

Turn the GTS on.

9.

Enter the following menus: Powertrain / Engine / Trouble Codes [C].

10.

Read pending DTCs.

HINT:
·

If a pending DTC is output, the system is malfunctioning.

·

If a pending DTC is not output, perform the following procedure.



11.

Enter the following menus: Powertrain / Engine / Utility / All Readiness.

12.

Input the DTC: P020113, P020213, P020313, P020413, P020513, P020613 or P062D13.

13.

Check the DTC judgment result.

GTS Display Description
NORMAL
·

DTC judgment completed

·

System normal


ABNORMAL
·

DTC judgment completed

·

System abnormal


INCOMPLETE
·

DTC judgment not completed

·

Perform driving pattern after confirming DTC enabling conditions



HINT:
·

If the judgment result is NORMAL, the system is normal.

·

If the judgment result is ABNORMAL, the system has a malfunction.

·

If the judgment result is INCOMPLETE, perform steps [B] through [C] again.




WIRING DIAGRAM

A368743E14
1.135,2.542 4.583,2.865 3.448,0.323 10 false No. 2 Fuel Injector Assembly (for Direct Injection) 4.667,1.24 4.979,1.438 0.313,0.198 10 false * 5.438,0.385 5.688,0.583 0.25,0.198 10 false 36 5.438,0.792 5.688,0.99 0.25,0.198 10 false 17 5.813,0.583 6.25,0.802 0.438,0.219 10 false #1D+ 5.813,1 6.25,1.219 0.438,0.219 10 false #1D- 1.896,0.823 2.083,1.042 0.188,0.219 10 false 2 1.135,1.208 1.448,1.406 0.313,0.198 10 false D1 2.896,0.823 3.083,1.042 0.188,0.219 10 false 1 1.135,2.375 1.448,2.573 0.313,0.198 10 false E1 1.135,1.396 4.573,1.771 3.438,0.375 10 false No. 1 Fuel Injector Assembly (for Direct Injection) 5.813,1.75 6.25,1.969 0.438,0.219 10 false #2D+ 5.813,2.125 6.25,2.344 0.438,0.219 10 false #2D- 5.438,1.542 5.688,1.74 0.25,0.198 10 false 34 5.438,1.948 5.688,2.146 0.25,0.198 10 false 15 2.896,1.979 3.083,2.198 0.188,0.219 10 false 1 1.885,1.979 2.073,2.198 0.188,0.219 10 false 2 4.646,2.427 4.958,2.625 0.313,0.198 10 false * 1.104,3.479 1.417,3.677 0.313,0.198 10 false D2 1.104,3.625 4.542,3.938 3.438,0.313 10 false No. 3 Fuel Injector Assembly (for Direct Injection) 4.656,3.531 4.969,3.729 0.313,0.198 10 false * 5.438,2.656 5.688,2.854 0.25,0.198 10 false 32 5.438,3.073 5.688,3.271 0.25,0.198 10 false 13 2.917,3.073 3.104,3.292 0.188,0.219 10 false 1 1.885,3.115 2.073,3.333 0.188,0.219 10 false 2 5.802,2.854 6.24,3.073 0.438,0.219 10 false #3D+ 5.802,3.271 6.24,3.49 0.438,0.219 10 false #3D- 1.875,4.26 2.063,4.479 0.188,0.219 10 false 2 2.917,4.25 3.104,4.469 0.188,0.219 10 false 1 1.083,4.604 1.396,4.802 0.313,0.198 10 false E2 1.083,4.781 4.563,5.052 3.479,0.271 10 false No. 4 Fuel Injector Assembly (for Direct Injection) 4.656,4.677 4.969,4.875 0.313,0.198 10 false * 5.438,3.802 5.688,4 0.25,0.198 10 false 35 5.438,4.219 5.688,4.417 0.25,0.198 10 false 16 5.813,4 6.25,4.219 0.438,0.219 10 false #4D+ 5.813,4.427 6.25,4.646 0.438,0.219 10 false #4D- 1.073,5.792 1.385,5.99 0.313,0.198 10 false D3 1.073,5.938 4.552,6.219 3.479,0.281 10 false No. 5 Fuel Injector Assembly (for Direct Injection) 1.865,5.406 2.052,5.625 0.188,0.219 10 false 2 2.906,5.396 3.094,5.615 0.188,0.219 10 false 1 5.438,4.948 5.688,5.146 0.25,0.198 10 false 33 5.438,5.354 5.688,5.552 0.25,0.198 10 false 14 5.802,5.146 6.24,5.365 0.438,0.219 10 false #5D+ 5.813,5.563 6.25,5.781 0.438,0.219 10 false #5D- 4.667,5.823 4.979,6.021 0.313,0.198 10 false * 4.656,6.927 4.969,7.125 0.313,0.198 10 false * 1.052,6.896 1.365,7.094 0.313,0.198 10 false E3 1.052,7.042 4.573,7.417 3.521,0.375 10 false No. 6 Fuel Injector Assembly (for Direct Injection) 1.854,6.521 2.042,6.74 0.188,0.219 10 false 2 2.927,6.531 3.115,6.75 0.188,0.219 10 false 1 5.427,6.083 5.677,6.281 0.25,0.198 10 false 31 5.427,6.5 5.677,6.698 0.25,0.198 10 false 12 5.802,6.271 6.24,6.49 0.438,0.219 10 false #6D+ 5.802,6.688 6.24,6.906 0.438,0.219 10 false #6D- 6.073,7.24 6.615,7.458 0.542,0.219 10 false ECM 0.198,7.427 1.135,7.625 0.938,0.198 10 false *: Shielded 5.385,6.677 5.823,6.896 0.438,0.219 10 false C37 5.396,6.271 5.833,6.49 0.438,0.219 10 false C37 5.385,5.542 5.823,5.76 0.438,0.219 10 false C37 5.385,5.135 5.823,5.354 0.438,0.219 10 false C37 5.396,4.396 5.833,4.615 0.438,0.219 10 false C37 5.385,3.99 5.823,4.208 0.438,0.219 10 false C37 5.396,3.25 5.833,3.469 0.438,0.219 10 false C37 5.396,2.844 5.833,3.063 0.438,0.219 10 false C37 5.385,2.125 5.823,2.344 0.438,0.219 10 false C37 5.385,1.719 5.823,1.938 0.438,0.219 10 false C37 5.396,0.979 5.833,1.198 0.438,0.219 10 false C37 5.385,0.573 5.823,0.792 0.438,0.219 10 false C37

A480730E01
6.281,1.74 6.729,1.958 0.448,0.219 10 false +BD1 4.375,2.073 4.74,2.281 0.365,0.208 10 false EDU 0.531,1.906 0.896,2.115 0.365,0.208 10 false EDU 5.115,2.333 5.844,2.573 0.729,0.24 10 false EDU NO. 2 5.115,1.906 5.844,2.146 0.729,0.24 10 false EDU NO. 1 5.115,2.75 5.844,2.99 0.729,0.24 10 false EDU NO. 3 5.094,3.188 5.823,3.427 0.729,0.24 10 false EDU NO. 4 6.302,1.167 6.667,1.375 0.365,0.208 10 false IREL 6.302,2.156 6.75,2.375 0.448,0.219 10 false +BD2 6.313,2.583 6.76,2.802 0.448,0.219 10 false +BD3 6.313,3 6.76,3.219 0.448,0.219 10 false +BD4 6.302,0.646 6.771,0.844 0.469,0.198 10 false MREL 3.135,1.365 4,1.583 0.865,0.219 10 false EFI-B NO. 4 0.323,1.375 1.458,1.677 1.135,0.302 10 false EFI MAIN NO. 1 1.958,1.49 2.969,1.698 1.01,0.208 10 false EFI MAIN NO. 1 1.281,0.771 2.021,0.958 0.74,0.188 10 false EFI NO. 2 6.302,3.438 6.75,3.656 0.448,0.219 10 false E1D1 6.469,3.875 6.917,4.094 0.448,0.219 10 false ECM 5.969,0.604 6.281,0.865 0.313,0.26 10 false B1 5.969,1.198 6.292,1.438 0.323,0.24 10 false B1 5.938,1.76 6.271,2.031 0.333,0.271 10 false C37 5.938,2.188 6.25,2.417 0.313,0.229 10 false C37 5.938,2.604 6.25,2.854 0.313,0.25 10 false C37 5.938,3.021 6.281,3.24 0.344,0.219 10 false C37 5.958,3.438 6.281,3.667 0.323,0.229 10 false B1 6,0.396 6.208,0.615 0.208,0.219 10 false 3 6.01,0.969 6.219,1.188 0.208,0.219 10 false 2 5.969,1.542 6.177,1.76 0.208,0.219 10 false 19 5.969,2.396 6.177,2.615 0.208,0.219 10 false 18 5.969,1.979 6.177,2.198 0.208,0.219 10 false 38 5.979,2.813 6.188,3.031 0.208,0.219 10 false 37 5.979,3.24 6.188,3.458 0.208,0.219 10 false 10 2.781,1.052 2.99,1.271 0.208,0.219 10 false 5 4.844,1.615 5.052,1.833 0.208,0.219 10 false 5 2.021,0.458 2.229,0.677 0.208,0.219 10 false 1 4.115,1.042 4.323,1.26 0.208,0.219 10 false 1 2.792,0.469 3,0.688 0.208,0.219 10 false 2 4.844,1.042 5.052,1.26 0.208,0.219 10 false 2 4.115,1.625 4.323,1.844 0.208,0.219 10 false 3 2.021,1.042 2.229,1.26 0.208,0.219 10 false 3 0.521,3.771 1.375,4.01 0.854,0.24 10 false Battery 0.323,2.438 1.458,2.74 1.135,0.302 10 false SUB R/B-NO. 1

CAUTION / NOTICE / HINT

NOTICE:

Inspect the fuses for circuits related to this system before performing the following procedure.


HINT:
·

If the current from the EDU relay is cut because DTC P062D13 is stored, DTC P123513 will be stored even if the fuel pump assembly (for high pressure side) is normal.

·

Read Freeze Frame Data using the GTS. The ECM records vehicle and driving condition information as Freeze Frame Data the moment a DTC is stored. When troubleshooting, Freeze Frame Data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, if the air fuel ratio was lean or rich, and other data from the time the malfunction occurred.



PROCEDURE

1.CHECK DTC OUTPUT (DTC P020113, P020213, P020313, P020413, P020513, P020613 AND/OR P062D13)
a.

Read the DTCs.

Powertrain > Engine > Trouble Codes
50001 372
Result:
Result Proceed to
P020113, P020213, P020313, P020413, P020513 or P020613 is output A
3 or more of the following DTCs are output: P062D13, P020113, P020213, P020313, P020413, P020513 or P020613 B
P062D13 is output




A

2.CHECK HARNESS AND CONNECTOR

B

4.INSPECT EDU RELAY
2.CHECK HARNESS AND CONNECTOR
a.

Disconnect the ECM connector.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(C37)Location & Routing

Click Connector(C37)Engine Compartment>Connecting Wire / Cooling Fan Wire / Engine Wire / Fuel Pump Motor Wire / No. 1 Connecting Wire / No. 10 Engine Wire / No. 2 Connecting Wire / No. 3 Connecting Wire / No. 4 Connecting Wire / Sensor Wire / Turbocharger Wire>ECM

C37-36 (#1D+) - C37-17 (#1D-) 20°C (68°F) 1.34 to 1.64 Ω
C37-34 (#2D+) - C37-15 (#2D-) 20°C (68°F) 1.34 to 1.64 Ω
C37-32 (#3D+) - C37-13 (#3D-) 20°C (68°F) 1.34 to 1.64 Ω
C37-35 (#4D+) - C37-16 (#4D-) 20°C (68°F) 1.34 to 1.64 Ω
C37-33 (#5D+) - C37-14 (#5D-) 20°C (68°F) 1.34 to 1.64 Ω
C37-31 (#6D+) - C37-12 (#6D-) 20°C (68°F) 1.34 to 1.64 Ω
C37-36 (#1D+) or C37-17 (#1D-) - Body ground and other terminals Always 1 MΩ or higher
C37-34 (#2D+) or C37-15 (#2D-) - Body ground and other terminals Always 1 MΩ or higher
C37-32 (#3D+) or C37-13 (#3D-) - Body ground and other terminals Always 1 MΩ or higher
C37-35 (#4D+) or C37-16 (#4D-) - Body ground and other terminals Always 1 MΩ or higher
C37-33 (#5D+) or C37-14 (#5D-) - Body ground and other terminals Always 1 MΩ or higher
C37-31 (#6D+) or C37-12 (#6D-) - Body ground and other terminals Always 1 MΩ or higher


HINT:

The standard values shown are direct fuel injector assembly resistance values.



Result:
Proceed to
OK
NG



OK

NG

3.INSPECT DIRECT FUEL INJECTOR ASSEMBLY (RESISTANCE)
3.INSPECT DIRECT FUEL INJECTOR ASSEMBLY (RESISTANCE)

Click hereEngine / Hybrid System>V35A-FTS (FUEL)>FUEL INJECTOR (for Direct Injection)>INSPECTION

HINT:

Perform "Inspection After Repair" after replacing the direct fuel injector assembly.

Click hereEngine / Hybrid System>V35A-FTS (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION


Result:
Proceed to
OK
NG



OK

REPAIR OR REPLACE HARNESS OR CONNECTOR (DIRECT FUEL INJECTOR ASSEMBLY - ECM)

NG

4.INSPECT EDU RELAY

OK

5.CHECK TERMINAL VOLTAGE (POWER SOURCE OF EDU RELAY)

NG

REPLACE EDU RELAY

5.CHECK TERMINAL VOLTAGE (POWER SOURCE OF EDU RELAY)
a.
A485840C01
0.094,0.052 0.406,0.208 0.313,0.156 10 false *1 1.281,0.167 1.594,0.323 0.313,0.156 10 false *2
*1 No. 2 Engine Room Relay Block and Junction Block Assembly
*2 EDU Relay


Remove the EDU relay from the No. 2 engine room relay block and junction block assembly.


b.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Condition Specified Condition
3 (EDU relay) - Body ground Always 11 to 14 V



Result:
Proceed to
OK
NG



OK

6.CHECK TERMINAL VOLTAGE (POWER SOURCE OF EDU RELAY)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR (BATTERY - EDU RELAY)

6.CHECK TERMINAL VOLTAGE (POWER SOURCE OF EDU RELAY)
a.
A485840C01
0.094,0.052 0.406,0.208 0.313,0.156 10 false *1 1.281,0.167 1.594,0.323 0.313,0.156 10 false *2
*1 No. 2 Engine Room Relay Block and Junction Block Assembly
*2 EDU Relay


Remove the EDU relay from the No. 2 engine room relay block and junction block assembly.


b.

Turn the ignition switch to ON.


c.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Condition Specified Condition
1 (EDU relay) - Body ground Ignition switch ON 11 to 14 V



Result:
Proceed to
OK
NG



OK

7.CHECK HARNESS AND CONNECTOR (EDU RELAY - ECM)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR (EFI MAIN NO. 1 RELAY - EDU RELAY)

7.CHECK HARNESS AND CONNECTOR (EDU RELAY - ECM)
a.

Remove the EDU relay from the No. 2 engine room relay block and junction block assembly.


b.

Disconnect the ECM connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(C37,B1)Location & Routing

Click Connector(C37)Engine Compartment>Connecting Wire / Cooling Fan Wire / Engine Wire / Fuel Pump Motor Wire / No. 1 Connecting Wire / No. 10 Engine Wire / No. 2 Connecting Wire / No. 3 Connecting Wire / No. 4 Connecting Wire / Sensor Wire / Turbocharger Wire>ECM

Click Connector(B1)Engine Compartment>Engine Room Main Wire / Lamp Wire / No. 2 Engine Room Wire / No. 2 Lamp Wire / No. 3 Engine Room Wire / No. 6 Engine Room Wire / Washer Wiring Assembly>ECM

5 (EDU relay) - C37-19 (+BD1) Always Below 1 Ω
5 (EDU relay) - C37-38 (+BD2) Always Below 1 Ω
5 (EDU relay) - C37-18 (+BD3) Always Below 1 Ω
5 (EDU relay) - C37-37 (+BD4) Always Below 1 Ω
2 (EDU relay) - B1-2 (IREL) Always Below 1 Ω
5 (EDU relay), C37-19 (+BD1), C37-38 (+BD2), C37-18 (+BD3) or C37-37 (+BD4) - Body ground and other terminals Always 10 kΩ or higher
2 (EDU relay) or B1-2 (IREL) - Body ground and other terminals Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR