| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from | Priority |
|---|---|---|---|---|---|
| U042381 | Invalid Data Received from Instrument Panel Cluster Control Module Invalid Serial Data Received | After approximately 2 seconds have elapsed since turning the ignition switch to ON and with the dynamic radar cruise control system on, the ECM received invalid data from the combination meter assembly for approximately 5 seconds or more. |
·
Meter/gauge system
·
ECM |
Cruise Control | B |
Before replacing the ECM, refer to Service Bulletin.
Check for DTCs.
If DTC U042381 is output by the dynamic radar cruise control system, perform troubleshooting for the meter/gauge system.
| Result | Proceed to |
|---|---|
| Meter/gauge system DTCs are not output | A |
| Meter/gauge system DTCs are output | B |
A
for 1GR-FE: Click hereEngine / Hybrid System>1GR-FE (ENGINE CONTROL)>ECM>REMOVAL
for V35A-FTS: Click hereEngine / Hybrid System>V35A-FTS (ENGINE CONTROL)>ECM>REMOVAL
for F33A-FTV: Click hereEngine / Hybrid System>F33A-FTV (ENGINE CONTROL)>ECM>REMOVAL
B
Click hereVehicle Interior>METER / GAUGE / DISPLAY>METER / GAUGE SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING