| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from | Priority |
|---|---|---|---|---|---|
| U042381 | Invalid Data Received from Instrument Panel Cluster Control Module Invalid Serial Data Received | After approximately 2 seconds have elapsed since turning the ignition switch to ON and with the cruise control system on, the ECM received invalid data from the combination meter assembly for approximately 5 seconds or more. |
·
Meter/gauge system
·
ECM |
Cruise Control | B |
Before replacing the ECM, refer to Service Bulletin.
Check for DTCs.
If DTC U042381 is output by the cruise control system, perform troubleshooting for the meter/gauge system.
| Result | Proceed to |
|---|---|
| Meter/gauge system DTCs are not output | A |
| Meter/gauge system DTCs are output | B |
A
for 1GR-FE: Click hereEngine / Hybrid System>1GR-FE (ENGINE CONTROL)>ECM>REMOVAL
for V35A-FTS: Click hereEngine / Hybrid System>V35A-FTS (ENGINE CONTROL)>ECM>REMOVAL
for F33A-FTV: Click hereEngine / Hybrid System>F33A-FTV (ENGINE CONTROL)>ECM>REMOVAL
B
Click hereVehicle Interior>METER / GAUGE / DISPLAY>METER / GAUGE SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING