| *A | for Standard | *B | for Aero Type |
| *C | for GR SPORT | *D | except GR SPORT |
| *E | w/ Urea SCR System | *F | w/ DPF |
|
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
|
|
23710B 1.INSTALL EXHAUST FUEL ADDITION INJECTOR ASSEMBLY
23720 2.INSTALL UREA INJECTOR ASSEMBLY
16282 3.CONNECT NO. 5 WATER BY-PASS HOSE
| *a | Upper Side | *b | RH Side |
| *c | 30° | *d | 47° |
| *e | 2 to 5 mm (0.0787 to 0.197 in.) | - | - |
Connect the No. 5 water by-pass hose to the electric water pump assembly and slide the hose clip to secure it.
Align the hose clip at the locations shown in the illustration.
16264 4.CONNECT NO. 2 WATER BY-PASS HOSE
| *a | Rear Side | *b | RH Side |
| *c | 30° | *d | 2 to 5 mm (0.0787 to 0.197 in.) |
Connect the No. 2 water by-pass hose to the electric water pump assembly and slide the hose clip to secure it.
Align the hose clip at the locations shown in the illustration.
161B0 5.INSTALL ELECTRIC WATER PUMP ASSEMBLY
|
|
82H21F 6.INSTALL CONNECTOR COVER
51043 7.INSTALL ENGINE SIDE COVER SUB-ASSEMBLY RH
8.ADD COOLANT (for Intercooler)
9.INSPECT FOR COOLANT LEAK (for Intercooler)